Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

help with winch

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 215
Joined: Mon Aug 09, 2004 9:32 pm
Location: Ipswich

help with winch

Post by 92mav »

finally i have got some plasma for my high mount winch :armsup: and now it wont work properly on the hand controler. my in cab controls work fine :x any help?
Brad
GQ TD42, 4" lift, 2" bodylift, 4.6 s, detroit lockers, 35,s t3/t4 plus a turbo,
Top
Posts: 270
Joined: Sat Apr 29, 2006 6:03 pm
Location: Victoria

Re: help with winch

Post by TEAMRPM »

92mav wrote:finally i have got some plasma for my high mount winch :armsup: and now it wont work properly on the hand controler. my in cab controls work fine :x any help?
Brad

crook controller maybe!

is it a 5 or 3 pin solenoid setup?
Top
Posts: 215
Joined: Mon Aug 09, 2004 9:32 pm
Location: Ipswich

Post by 92mav »

checked that and all wiring to the controler with an ohm meter and all of it is ok . no crossed wires. no broken wires . the wired thing is it will sometimes go the same way no matter which way the switch is pushed that is on the hand controller not the in cab controller. i,m miffed

Brad
the controler only uses 3 wires
GQ TD42, 4" lift, 2" bodylift, 4.6 s, detroit lockers, 35,s t3/t4 plus a turbo,
Top
Posts: 4607
Joined: Sun Oct 22, 2006 8:11 pm
Location: yallourn north,victoria

Post by tna racing »

hey mate check the solioid box and run a multi meter across the circut as it should only b going 1 way
1993 Gq lwb with added xtra's :) sold
fj60,lifted,35s,33s for daily, 3f power!
Top
Posts: 215
Joined: Mon Aug 09, 2004 9:32 pm
Location: Ipswich

Post by 92mav »

yes but if it were a problem with the solinoids i would not switch properly with either controles
GQ TD42, 4" lift, 2" bodylift, 4.6 s, detroit lockers, 35,s t3/t4 plus a turbo,
Top
Posts: 4607
Joined: Sun Oct 22, 2006 8:11 pm
Location: yallourn north,victoria

Post by tna racing »

yer maybe theres a ire loose in ur solinoid box to ur controller plug.just narrowing down the list
1993 Gq lwb with added xtra's :) sold
fj60,lifted,35s,33s for daily, 3f power!
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest