G'day, i drive an 89 wt 1.3litre sierra. my t-case has been leaking oil from the oil seals. On closer inspection it looks like 2 seals can be replaced from the outside and the other on the opposite side of the case needs to be replaced from the inside? Is this correct? so that i would need to open up the transfer case to replace it. My manual is useless, has no detail!
Thanks Ian
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Transfer case oil seals
DL full manual from www.suzukiinfo.com
drover is same as the NT and WT's abviously some differences but all mech is the same.
front input can be separated from the case in car i beleive.
Nic
drover is same as the NT and WT's abviously some differences but all mech is the same.
front input can be separated from the case in car i beleive.
Nic
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Who is online
Users browsing this forum: No registered users and 65 guests