Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

HiLuX diff

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 9
Joined: Fri Sep 22, 2006 7:30 pm
Location: Wollongong

HiLuX diff

Post by Leeo D »

Just a quick and easy one for you guys, A mate has a hilux and has nearly rounded off the rear diff fill plug.He thinks it is a reverse thread (left Hand).I jst want to make sure before I help him with my pipe wrench.
Top
Posts: 22
Joined: Fri Dec 01, 2006 10:41 am
Location: brisbane

Post by lux44 »

right hand thread brother, (rightie tightie - leftie loosie) :roll:
D.O.T.SUX 38 swampers, twin air locks, 2jz-400horsies, bobbed styleside etc etc
gu patrol ute daily driver.
Top
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Contact:
Contact ausyota

Post by ausyota »

Its a standard thread.
If all else fails weld a bolt to it. The heat will shrink it when it cools and you have something to get a spanner onto.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Top
Posts: 9
Joined: Fri Sep 22, 2006 7:30 pm
Location: Wollongong

Post by Leeo D »

Thanks for that.Will give it a go.
Top
Posts: 199
Joined: Wed Jun 29, 2005 12:55 pm
Location: Gold Coast

Post by Rascal »

Get a new one from the wreckers. The end of the bolt is magnetized to collect any metal in the oil. Welding the bolt will destroy the magnet and cause the diff center to wear quicker.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 71 guests