100 Series ABS

[me3@neuralfibre.com]

Does anyone know in the 100 Series when the ABS is on / off. I tried mine last weekend in high range 4wd (centre locked) on dirt and the ABS was still active. I thought that once the centre diff was locked it was off.
As there is no vacuum brake booster, just the abs pressure store, I can't pull the fuse to disable the ABS when off-road.

Any thoughts appreciated

Paul

[striker99]

Isnt there a switch you can press to disable it?

[dow50r]

have a look on www.lcool.org The 80 series can be modded by a switch, the 100 is a little different, and i believe a switch needs to be installed to take power away from it....
Andrew

[me3@neuralfibre.com]

have a look on www.lcool.org The 80 series can be modded by a switch, the 100 is a little different, and i believe a switch needs to be installed to take power away from it....
Andrew

Nothing I have found on LCool for 100 Series ABS

[jimbo jones]

I just pill the fues out its under the bonnet
the abs light will come on then just re fit it when you air up work good
jimbo

[me3@neuralfibre.com]

I just pill the fues out its under the bonnet
the abs light will come on then just re fit it when you air up work good :D
jimbo

Won't that kill the ABS booster pump / resovoir = no brake boost? I think that would be a bad thing. Guarantee nothing would lock up, like old fashioned abs - 4 wheel cable drum brakes - never lock them up.

[dow50r]

No, it only disables the abs function....u can install a switch if you prefer that to the fuse....ABS is disabled in low range, where toyota thinks you wont go fast enough to need it...