Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Axle length 60/80 series, how much difference?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 438
Joined: Tue Feb 20, 2007 7:34 am
Location: Gordonvale Queensland

Contact:
Contact flyology

Axle length 60/80 series, how much difference?

Post by flyology »

OK, I have been advised that there is approx 2"difference between the track of a 60 and an 80 series cruiser. Now with the off set of the rear hubs being around and inch on either side, (80 series wider) how much difference is there in axle width? or are we talking 2" difference in hug to hub width, so really the track difference between 60 and 80 series is 4 inches...
Top
Posts: 1562
Joined: Sun Nov 21, 2004 7:26 pm
Location: Blue Mountains

Re: Axle length 60/80 series, how much difference?

Post by -Richo- »

flyology wrote:OK, I have been advised that there is approx 2"difference between the track of a 60 and an 80 series cruiser. Now with the off set of the rear hubs being around and inch on either side, (80 series wider) how much difference is there in axle width? or are we talking 2" difference in hug to hub width, so really the track difference between 60 and 80 series is 4 inches...
80s track is 1600mm
60s track is 1475mm
Yurich Design Services
www.yds.net.au
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

and to top it off....the rear hub and brake assemblies on the disc rear end 75 will bolt straight on to an 80 axle. Each hub is set further in, so track can be reduced on an 80 rear diff by 60mm....or increased on a 75 by 60mm using 80 hub/brakes :)
Andrew
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest