Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

draw runners /fridge slides?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 293
Joined: Wed Oct 29, 2003 5:32 pm
Location: sydney (penrith)

draw runners /fridge slides?

Post by ROCKMUTT »

Ive finished making my roller draws in the back of my GQ im now making a fridge slide to suit my new Fridgemate 70L what i am after those is a set of roller draw runners now i have found quiet a few of these that are rated to 100kg etc but the problem is i need a set that is 1 meter to 1.1m but extends 1 meter out , the closest i can find is a 1 meter set but they only open to 860mm its not enough to suit my fridge

does anyone know of where i can get a set of these runenrs in the size i need?

cheers shane
94 GQ ST LWB TD42 ,DTS turbo,3 inch exhaust,snorkel,dual batts,3 inch lift,30mm coil spacers,Warn 9000,ARB bar,33x12.5x15 MTz's on black sunnys
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

Check out Hafele. I've got a set which are about 750mm long, extend over 800mm.

They are $$$.
Top
Posts: 293
Joined: Wed Oct 29, 2003 5:32 pm
Location: sydney (penrith)

Post by ROCKMUTT »

yea ive checked hafele nothign in my size range needed
94 GQ ST LWB TD42 ,DTS turbo,3 inch exhaust,snorkel,dual batts,3 inch lift,30mm coil spacers,Warn 9000,ARB bar,33x12.5x15 MTz's on black sunnys
Top
Posts: 3725
Joined: Wed Jun 30, 2004 1:45 pm
Location: Blue Mountains, or on a rig somewhere in bumf*ck idaho

Post by rockcrawler31 »

would be cheaper in the long run to use square hollow section and two rows of bearings. I used hafaele runners in mine, and for the money you would be better off just using say 20x20 or 15x15 square section and the bearings.
http://www.populationparty.org.au/
Top
Posts: 293
Joined: Wed Oct 29, 2003 5:32 pm
Location: sydney (penrith)

Post by ROCKMUTT »

well i think ive found my answer to my problem have a look at these ,there 1015mm long closed and extend out 1020mm rated to 120kg

http://elraco.com.au/product_info.php?products_id=3783
94 GQ ST LWB TD42 ,DTS turbo,3 inch exhaust,snorkel,dual batts,3 inch lift,30mm coil spacers,Warn 9000,ARB bar,33x12.5x15 MTz's on black sunnys
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

I would not recomend teliscopic slide types as on corogations or vibrations the balls fall out
Top
Posts: 68
Joined: Wed Jun 01, 2005 12:36 pm
Location: Albany Creek

Post by keencdk »

I agree, telescopic slides can be problematic. You also have to be very precise on the fitting as a couple of mm difference in width between front and back can cause problems.

Tore my telescopic slides (free IT server slides) out and replacing with roller bearings
Top
Posts: 173
Joined: Sun Mar 26, 2006 9:58 pm
Location: Pakenham, VIC

Post by guerd87 »

have you tried blum? another good manufacturer of all kinds of drawer rollers and hinges etc
Top
Posts: 1308
Joined: Tue Sep 23, 2003 10:17 pm
Location: BADFABING

Post by turbo gu »

when i built my drawers i just went to a carpenter/cabinet make who did custom kitchens and he pulled out a 3 inch thick catalogue and said what do you need!! it had ever combination you could think of with massive range in weight ratings.
GU 42td wagon for touring
GU ute for the fun stuff
http://www.allterrain4wd.org.au/
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 0 guests