I tried putting the case back in the car and reconnecting drive shafts then trying to undo it.
I tried heating it.
I tried putting the flange in a vice and beating the crap out of my ratchet with a hammer.
I tried using a 1.5M breaker bar on it.
I tried putting a screwdriver through one of the flange bolt holes and locking it against the TC, and bent then broke the screwdriver (snap on
![cussing :bad-words:](./images/smilies/new_cussing.gif)
I took the front section off the TC, put a vice clamp type tool on the inside off the input shaft, and beating the crap out of the bloody thing..........
I ground off the locking tags (incase they were deeper than normal and were still locked further down the shaft)
And I tried a few other combinations of the above
Cookie of a thing hasn't move a millimeter.
Has anyone got any other ideas on how I can get the flange nut off.
Only other things I can think of is a impact gun(I dont have one), or a stick of dynamite.