Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

camber problem

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 37
Joined: Mon Jun 07, 2004 10:44 pm
Location: s/w vic

camber problem

Post by old tom »

HI i have a gu that has front end problem pas 0 deg driv -3 deg has any one had this problem ? and how to fix
Top
Posts: 736
Joined: Mon Mar 07, 2005 5:25 pm
Location: Redcliffe, Brisbane

Post by chops »

bent housing?
1988 351W GQ wagon
Top
Posts: 3443
Joined: Tue Oct 29, 2002 10:50 pm
Location: Currently On the Road !!

Post by Dozoor »

Im assuming king pin bearings are ok , only other thing is Bent housing as
Chops wrote .

There used to be a place that specialised in this sort of thing out camden /narrelen nsw . Not much help to you though Tom being from VIC.

any truck alighn places down there ?
Top
Posts: 37
Joined: Mon Jun 07, 2004 10:44 pm
Location: s/w vic

Post by old tom »

what about of set bushes for the king pins or are thay just a bandaid?
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

That would be a bandaid - the housing will still be bent and likely weakened by the impact that bent it in the first place.

Steve
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Posts: 37
Joined: Mon Jun 07, 2004 10:44 pm
Location: s/w vic

Post by old tom »

got to love those sand dunes! so neg camber does that mean that top of wheel is faceing inwards? does anyone know someone in melbourne who can straighten housing thanks :?
Top
Posts: 870
Joined: Sat Jun 03, 2006 5:32 pm
Location: sydney

Post by MART »

Probably better to source a new housing and all new diff , went down the diiff housing thing before in the cruiser , when they straightened it they crystalised the metal and the housing cracked after a while , Cheers Paul.
BLOWNZUK 1.3 efi,sc14 supercharger,hilux diffs,detroit lockers,stage 4 rockhopper,6 point cage,35 muddies.
Top
Posts: 2186
Joined: Wed Oct 01, 2003 9:11 pm
Location: Melbourne, now with 1HDFTi power!

Contact:
Contact +dj_hansen+

Post by +dj_hansen+ »

old tom wrote:got to love those sand dunes! so neg camber does that mean that top of wheel is faceing inwards? does anyone know someone in melbourne who can straighten housing thanks :?
Give cheezy a call, better yet probably drop in to get an answer... otherwsie chase up a new housing.
Cheers,
Dan.

[i]1996 HDJ80R[/i]
Top
Posts: 37
Joined: Mon Jun 07, 2004 10:44 pm
Location: s/w vic

Post by old tom »

does any one know how much for a new housing and where is best place to source one?
Top
Posts: 218
Joined: Tue Jan 16, 2007 9:28 pm

Post by tuffsahara »

yeap only way to fix it is get it straightend or new housing -3 degrees is alot of negative camber wont even get that out with offset king pins
Top
User avatar
lay80n
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Contact:
Contact lay80n

Post by lay80n »

When you do correct it, either straighten or new housing, i woul suggest laminating or bracing the diff if you plan to keep driving like you currently do, or you will be going through this again.

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Trans diff in Bayswater fixed one of mine a couple of years back.

Bazzle
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 110 guests