Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

3L surf turbo on a 1HZ

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 57
Joined: Wed Dec 14, 2005 8:57 pm
Location: shoalhaven nsw

3L surf turbo on a 1HZ

Post by T-rex »

just wanted some info, would a 3L surf turbo be big enough to fit on a 1HZ
I have a spare after the surf motor went pop. i know i could adapt it to the exhaust manifold but not sure on oil line pluming, and if it would keep up the right boost.

any thoughts
Troy
Top
Posts: 2347
Joined: Sat Jan 27, 2007 12:56 pm
Location: Perth

Post by Z()LTAN »

its hardly big enough im afraid...
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

The CT20 off a surf is nearing its peak on the 2l, you can get away with it on a 3L .. on a 4.2 litre 6 ... not a chance
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 57
Joined: Wed Dec 14, 2005 8:57 pm
Location: shoalhaven nsw

Post by T-rex »

Thanks fellas it was worth try :)
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 107 guests