Hi i was wondering if the 1.3 carby swift motor and g/box will fit in a 1ltr sierra? I know i'd have to get a 1.3 bonnet (dont want body lift) and jackshaft, but i can get a 4-door swift for $400 with a 1.3 and 5-speed. The only thing that i'm not sure about is the fact that they are an east-west motor and front wheel drive.
So my question is if the g/box is different will a sierra 5-speed bolt to the swift motor? do they have the same bellhousing? also i'd have to get a 1.3 sierra sump too wouldn't i?
Thanks
Mitch
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Suzuki Swift 1.3
Suzuki Swift 1.3
1989 LN106- 2" spring lift, 285 mt117's, 4.8's, front spartan high pinion'd, 6000k H/L HID
All 1.6 swifts AFAIK were single-point injected, 16-valve engines, pretty similar to the 16-valve vitara motor (which are multi-point injected). So they would not be a straight bolt in as the ecu and injection setup would need wiring up.
So to answer your question 83zook, no they are not just a G16A with different pulleys, they are more like a G16B with a slightly different fuel injection setup.
So to answer your question 83zook, no they are not just a G16A with different pulleys, they are more like a G16B with a slightly different fuel injection setup.
98 WT LWB Maruti, 1.6efi, rockhoppers, 2" body lift, 2" springs, 32" BFG muddies, jimny Power Steer, front lockrite :-)
Who is online
Users browsing this forum: No registered users and 1 guest