Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

93 V6 4runner problem

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 196
Joined: Wed Jan 28, 2004 11:18 pm
Location: liverpool, western sydney

93 V6 4runner problem

Post by Barney7779 »

Ok guys need some help here

Mate of mine a a 93 V6 4runner, When it is cold it runs perfect but as soon as it get to operating temp it wont idle, has no power and is blowing heaps of fuel out the exhaust

The change from running good to running carp is instant and is not something that gets worse as it gets warmer. If you turn it off and let it cool for 10 mins it starts and runs fine until it gets back up to temp then it runs bad

Things we have changed/tested so far

Air flow meter(replaced)
Coolant temp sensor for ECU(replaced)
Plugs(replaced)
Plug leads(tested all good)
ECU(replaced with a known good unit)
Coil/igniter(tested good)
TPS(tested good)
O2 sensor(tested good)
Timing(checked and correct)
Dizzy/rotor button(checked all looks good)
All vacume hoses connected and in correct position
Fuel pressure Reg(replaced)
Fuel pressure checked(all good)


The computer will not show any error codes at all

What else could be causing the problem

Need some help guys or it will be BBQ time for the 4runner

Sorry for the long post but we are both out of ideas as to what it could be

Thanks
Posts: 342
Joined: Sun Sep 19, 2004 3:49 pm
Location: gippsland vic

Post by ratboy »

check the comp cold then hot
ok it was me
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Maybe see if you can get a efi specialest to look at it all th4es things at work we do sort out most of the dramas but there are ones that are a pain in the ass so insted of waisting time we just call a guy in and he gets them sorted DTC are one thing but you can get heaps more out of a scan tool than just that depends of knowlage of operator and from what the guy that does our efi stuff knows it a leage above what most people can do with a scan tool.
plenty of parts on the bench
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Another thought get injectors flow tested and cleaned.
plenty of parts on the bench
Posts: 15
Joined: Wed Apr 25, 2007 2:37 am
Location: perth

Post by fj45iris »

maybe fuel vaporization, fuel line to close to exhaust or something heating it excessively

or maybe vacuum leak, when hot a crack in manifold for example might open up and loose vacuum causing it not to idle
sorry will have to be trial and error on a few things cos so many options
IF IT AINT BROKE, YOU SQUAT TO PEE
Posts: 196
Joined: Wed Jan 28, 2004 11:18 pm
Location: liverpool, western sydney

Post by Barney7779 »

Thanks for the tips guys

Changed the fuel pump today as it was the only thing we hadn't changed so thought stuff it may as well


All seems fine took it out for a good run and had no problems at all


Thanks again
Posts: 158
Joined: Fri Jun 03, 2005 7:30 am
Location: South Brisbane

Post by Yumsylux »

why would a fuel pump run rough when it's hot? That's just bizzare. Anyone please explain?
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Welcome to the world of mechanics :D could be something to do with the springs inside the pump when heated up lose there "springyness" asuming it's mechanical, eletrical could be build up of heat from current flow which creates greater resitance then you have lower voltages just a thought.
plenty of parts on the bench
Post Reply

Who is online

Users browsing this forum: No registered users and 77 guests