Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

URGENTLY NEED INFORMATION

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Post Reply
Posts: 8
Joined: Wed Jun 22, 2005 3:47 pm
Location: South Coast NSW

URGENTLY NEED INFORMATION

Post by FrankS »

I urgently need the Torque figures and pattern for 1989 F70 Rocky Diesel head bolts and the correct timing marks for cam and injector pump.
There are 2 marks on the front pulley, the first one has the cam and injector pump lined up with their marks on the block and the second mark on the pulley is TDC, can any one send me a diagram of the correct timing alignment and the head bolt pattern and torque figures.
Also is there a torque figure for the adjustable timing belt tensioner or do you have a set amount of belt deflection, would really appreciate your help, I,m trying to get my son's Rocky back on the road for work on Monday, Thanks in Advance, Regards Frank.
Posts: 222
Joined: Thu Jul 24, 2003 9:26 pm
Location: Boyne Island (Near Gladstone)

Post by Clint »

I will have a look through the manual for ya and post it up if/when i find it.
Clint,
Limited Edition 95 Roza & 2006 ST Patrol Coil Cab Ute.... both a work in progress.
Posts: 222
Joined: Thu Jul 24, 2003 9:26 pm
Location: Boyne Island (Near Gladstone)

Post by Clint »

Here is the head bolt pattern and torque figures.
Image


I'll have a look for the other info.
Clint,
Limited Edition 95 Roza & 2006 ST Patrol Coil Cab Ute.... both a work in progress.
Posts: 222
Joined: Thu Jul 24, 2003 9:26 pm
Location: Boyne Island (Near Gladstone)

Post by Clint »

Timing mark info

Image

and belt tension check

Image

I hope this helps.
Clint,
Limited Edition 95 Roza & 2006 ST Patrol Coil Cab Ute.... both a work in progress.
Posts: 8
Joined: Wed Jun 22, 2005 3:47 pm
Location: South Coast NSW

Thanks for the Info

Post by FrankS »

Thank you Clint for your quick replies it is most appreciated and I hope I can be of assistance one day, Regards Frank.
Posts: 222
Joined: Thu Jul 24, 2003 9:26 pm
Location: Boyne Island (Near Gladstone)

Post by Clint »

No worries. Hope it all goes ok.
Clint,
Limited Edition 95 Roza & 2006 ST Patrol Coil Cab Ute.... both a work in progress.
Posts: 158
Joined: Sat May 20, 2006 12:55 am
Location: Perth, Western Australia

Post by tabrocky »

You can download PDF engine manuals from the WARFS website.
If the link below doesn't work, go to www.warfs.org then go to the "Daihatsu Manuals" button on the left hand side of the page. Then once that page opens, DONT download form the "1992 Rocky" column. Instead go across to the "F70, F75, F77" and then download the parts of the manual you need.

Cheers.

http://www.warfs.org/content/view/16/47/
If it doesn't have two sticks, I don't wana know about it!
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests