Occasionally on take off i hear a click coming from the rear diff area on my sierra NT, same kinda sound as you get in the front after you've locked the hubs in and drive off.
Today I had some weight in the back and it made a constant clicking under acceleration, got rid of the weight in the back and it clicking was gone.
I would of thought uni's but i only replaced them a couple of months ago unless theyre dodge. kinda has thrown me with the weight thing as it would of only been 50kg.
Had a vibration issue at about 25km/h till about 35, tracked that down to only having 3 saggy springs, so i made up a new spring pack with some other springs and that seemed to fix it.
But i find that with a load in the back it is vibrating again.
So im not really sure what the problem is and where to head to fix it, whether its a tailshaft balance issue?
Any ideas
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
clicking?
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
Yep, check your uni's, and also make sure your drive shafts are properly phased from when you last did your uni's. Make sure you fit geasable uni's, and grease them often.
Layto....
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
....and make sure some smartarsed mate hasn't cable-tied youlay80n wrote:Yep, check your uni's, and also make sure your drive shafts are properly phased from when you last did your uni's. Make sure you fit geasable uni's, and grease them often.
Layto....
DRS smells like a cat-food milkshake... and wet socks... and gorgonzola cheese... all whizzed up in a blender
Re: clicking?
Saggy springs will not cause a vibration. No way- unless they were causing massive axlewrapcrispy wrote: Had a vibration issue at about 25km/h till about 35, tracked that down to only having 3 saggy springs,
Any ideas
Are your U bolts tight? (look for any signs of movement around the spring pads?
Have you got enough leaves in the pack to prevent axlewrap?
Are your transfer case mounts intact?
Are your transfer case arms straight?
Is the slip yoke in the rear driveshaft well lubricated?
Are your hubs unlocking?
Check you haven't trashed the back diff - do you have any vertcal or horizonal movement in the pinion?
PS- you are checking the jackshaft unis too? these operate at a fair angle and flog out becuse they are spinning quicker than the tailshaft. They are often overlooked.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Everyone else is probably right about uni's, but I would check all your rear suspension, driveline bolts, to make sure they're tight. I posted about a clunking rear on heree a while ago, it turned out to be four loose bolts on the driver side brake drum. So yeah, check wheels, brakes, springs, shocks, tailshaft, etc...
Wheeling on completely wicked angles, without even looking stable.
Turned out to be one of the uni's on the rear driveshaft, yes one of the ones i got replaced only a month or 2 ago.
Gotta get that just cos its new doesnt mean its not the problem out of my head...lol.
In the process tho i found out my axle seals are slightly leaking but my brake pads have lotsa life left in them.
Thanks for all your help
Gotta get that just cos its new doesnt mean its not the problem out of my head...lol.
In the process tho i found out my axle seals are slightly leaking but my brake pads have lotsa life left in them.
Thanks for all your help
The road to enlightenment requires Four Wheel Drive
Who is online
Users browsing this forum: No registered users and 111 guests