Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2LT injector Pump - 1st generation 2LT

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 8
Joined: Fri Feb 09, 2007 11:57 am

2LT injector Pump - 1st generation 2LT

Post by roy batty »

Howdy Folks:

How much should I expect to pay for a used IP for a 86 2LT
and might anyone know where to look for one ?

Cheers thanks
Posts: 210
Joined: Sat Jan 06, 2007 11:21 pm
Location: Bunyip Victoria.

Post by goannaoffroad »

I would hazard a guess of around the $400-00 mark if you get it from a wreckers with a warranty.
Goanna Off Road, Out the back in the shed.
Posts: 8
Joined: Fri Feb 09, 2007 11:57 am

Post by roy batty »

Howdy goannaoffroad:

cheers thanks for the reply:

Are these 1st generations pretty popular- meaning are they still on the road/trails?

How about where to get parts for these injection pumps - look to dealer or ....
Specifically I seek a pickup sensor for the tach signal - they are no longer available here

Cheers :
Posts: 210
Joined: Sat Jan 06, 2007 11:21 pm
Location: Bunyip Victoria.

Post by goannaoffroad »

These engines are getting old now,not to many being rebuilt any more.The injector pump's are Nippon Denso and a lot of parts like the sensor your after are used in lots of different pumps from that manufacturer ,you could try a diesel specialist most are agents for Nippon Denso etc.
Where abouts are you from?
Goanna Off Road, Out the back in the shed.
Posts: 8
Joined: Fri Feb 09, 2007 11:57 am

Post by roy batty »

Howdy goannaoffroad:

I am in the desert of U S A - so I may have to source these parts cross the ponds, maybe

Good to know these are NipponDenso - just Denso now

I have pulled a schematic from the 2LT IP - for the pickup sensor part no. .it says refer to diagram 83-01 - dont see that one in any other schematic

still might be able to find one here if I can get a part no to cross refrence

Cheers ya:
T
Posts: 210
Joined: Sat Jan 06, 2007 11:21 pm
Location: Bunyip Victoria.

Post by goannaoffroad »

G'day Roy Batty:
Have you tried Specter Off-Road,inc. Chatsworth,California U.S.A.
Ph 818 882 1238 fax 818 882 7144.
the owners name is Marvin and he comes to Australia once or twice a year to buy Toyota 4wd parts to sell in the US he is one of the biggest s/h Toyota 4wd parts suppliers in the US and has been getting a lot of diesels to take home so may be worth a call.
The pick up sensor your after would probably be the same as a 2L or 3L the pumps are much the same for all diesels but the turbo pumps are calibrated different and have a few extra bits bolted on .
Hope I've been of some help ,Hooroo.
Goanna Off Road, Out the back in the shed.
Posts: 8
Joined: Fri Feb 09, 2007 11:57 am

Post by roy batty »

Howdy goannaoffroad:

Cheers mate :

I only contact Specter as a last resort - i usually cannot afford what he offers and for these specific items I have , in the past HAD to locate them myself

No worries - I rather enjoy sourcing parts this way

So far I have contacted Denso USA , a VW diesel place - I hear the VE Denso is very similar to teh Bosch VE
and seeking a place in your country deals with Diesel Service to see about locating this Pick Up Sensor

I have heard of Diesel Australia Brisbaine- I am looking to see if I can contact them via Email

I am in no great hurry , so that is good

might you know of some one there I might contact ?

I have also contacted VE China about this sensor - dunno about dealing with them , so far I have had less than good luck dealing with Chinese companies

Enjoy the week:

Cheers;

T
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests