i just want to know some what some info about running a s3 ie; highway speeds, fuel economy(31s, standard diffs)etc...
Im unsure wether i should get the s1 or go all out and get the s3.
thanks for any help.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
rockhopper info
My Brother has 5.14s on his coily and it works well with 3.9 diffs but i wouldnt use them in my car with 3.7 diffs. I wanted to go bigger tyres but wont do it now because it will get boggy on the road at 100k's. The 6.1 is perfect, but I like revs and momentum.
SUZUKI Remember anything else is a compromise.
Love the s3 but so I'm just gonna fix the gearing with wt centres and maybe bigger tyres
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
I had S1, and when i ran my 32's i found that it was just a bit high to keep descent performance on the street (std WT centres). I am now putting in calmini 5.14 as i smashed me s1. These seem to be a better choice for 31-32 inch tyres on the road, esp if the tyres are a heavy style (swampers etc).
Layto....
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
Will be fine.ofr57 wrote:so 5.14's wont make a little 1.3 redline by just doing 100
running 31 MTR's atm on NT diffs
down the track I'll be getting WT then putting some pitbull rockers on it
would i have to get a new R & P or would 5.14's handle 33's by themselfs
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
rock hoppers
I ordered a set of gears from LOWRANGE OFFROAD 6.5:1. 20% reduction in high and 187% reduction in low. Should suit 33's and 3.7's. NO QUESTIONS asked replacement guarantee. http://www.lowrangeoffroad.com/samdrivetrain.htm
Had series 4's in my 1.0ltr, also with 31's, off road gearing was super low, the 1.3 and 5 speed would have made things more useful.sanger wrote:Im also running series 4 and havnt had a problem off and on road. Im running 31'muddies and the gearing for on road is perfect.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Re: rock hoppers
I have been looling at these!want33s wrote:I ordered a set of gears from LOWRANGE OFFROAD 6.5:1. 20% reduction in high and 187% reduction in low. Should suit 33's and 3.7's. NO QUESTIONS asked replacement guarantee. http://www.lowrangeoffroad.com/samdrivetrain.htm
Would you be able to let me know what it worked out delievered to your door? PM if ya want! After they go in so do the 31's! Built swb sierra, building a lwb sierra ute and have a dmax for family camping
ll
I run Series 3, with 31 simexs and 3.9, I still think it needs more on the highway! I think a 4.3 ratio would be perfect!
you know you want one
Bill - have you got NT centres in yours?... sneaky 
If you are interested in the best balance between high and low, look at the Trail Tough 6.4:1 - it has the highest high range (only an 18% drop from memory) Also quite a good price and, apparently, a "no questions asked" warranty.
31's are about 19% taller than stock.
If you want to "correct" 31's with just a transfer, any 6:1 gearset will go pretty close as they range from 18-24% reduction.
What you can't take into account is the effect of higher rolling resistance and increased aerodynamic drag at speed from the bigger tyres.
Steve.
If you are interested in the best balance between high and low, look at the Trail Tough 6.4:1 - it has the highest high range (only an 18% drop from memory) Also quite a good price and, apparently, a "no questions asked" warranty.
31's are about 19% taller than stock.
If you want to "correct" 31's with just a transfer, any 6:1 gearset will go pretty close as they range from 18-24% reduction.
What you can't take into account is the effect of higher rolling resistance and increased aerodynamic drag at speed from the bigger tyres.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
can you explain this abit moreGwagensteve wrote: What you can't take into account is the effect of higher rolling resistance and increased aerodynamic drag at speed from the bigger tyres.
Steve.
I'm starting to think to go with the trial tough so i have less to worry about when i go 33"
[color=green]Vote Earth[/color]
Oh, and weight.
Wider and more aggressive tyres take more power to push. The added weight of heavier wheels and tyres take the edge off it as well.
At the end of the day, of you gear the car exactly back to stock, it will be slower than it was when standard. One way around this is to gear a bit shorter than stock so you are carrying a few more revs than stock. Another way is to look for torque increases in the motor (but only if they apply at cruising revs)
I don't daily drive my sierra, so for me, if my car is slow and noisy I will live with it, but if refinement etc is important, then you will have to tread carefully to get decent drivability.
an obvious solution is to run the narrowest, least aggressive tyre possible in the diameter you need for correct gearing on road, and leave the wider, more aggressive tyres for trip only.
Maybe, 3.9's and a trail tough 6:1 would be sweet for road use- or a 24% reduction high range with WT gears. I guess the answer lies a bit with your expectation of what the car should drive like.
As an aside though, nobody would expect a patrol to drive like stock with 37's on it, so you can't expect a sierra to drive like stock with 31's on it.
sorry if t his doesn;t really answer your question
Steve.
Wider and more aggressive tyres take more power to push. The added weight of heavier wheels and tyres take the edge off it as well.
At the end of the day, of you gear the car exactly back to stock, it will be slower than it was when standard. One way around this is to gear a bit shorter than stock so you are carrying a few more revs than stock. Another way is to look for torque increases in the motor (but only if they apply at cruising revs)
I don't daily drive my sierra, so for me, if my car is slow and noisy I will live with it, but if refinement etc is important, then you will have to tread carefully to get decent drivability.
an obvious solution is to run the narrowest, least aggressive tyre possible in the diameter you need for correct gearing on road, and leave the wider, more aggressive tyres for trip only.
Maybe, 3.9's and a trail tough 6:1 would be sweet for road use- or a 24% reduction high range with WT gears. I guess the answer lies a bit with your expectation of what the car should drive like.
As an aside though, nobody would expect a patrol to drive like stock with 37's on it, so you can't expect a sierra to drive like stock with 31's on it.
sorry if t his doesn;t really answer your question
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Re: rock hoppers
TRANSFER GEARS ....US$475suzuki boy wrote:I have been looling at these!want33s wrote:I ordered a set of gears from LOWRANGE OFFROAD 6.5:1. 20% reduction in high and 187% reduction in low. Should suit 33's and 3.7's. NO QUESTIONS asked replacement guarantee. http://www.lowrangeoffroad.com/samdrivetrain.htm
TRANSFER Rebuid kit ..... US$79
Large Input Shaft ...... US$97
Freight ....... US$100 = US$751 = AU$976
Inflation rate will change this figure daily but you are looking at about $1000. As soon as these go in I get 33's. Then I'll have to make a new rear bar and spare carrier!
yeah it doesGwagensteve wrote:Oh, and weight.
Wider and more aggressive tyres take more power to push. The added weight of heavier wheels and tyres take the edge off it as well.
At the end of the day, of you gear the car exactly back to stock, it will be slower than it was when standard. One way around this is to gear a bit shorter than stock so you are carrying a few more revs than stock. Another way is to look for torque increases in the motor (but only if they apply at cruising revs)
I don't daily drive my sierra, so for me, if my car is slow and noisy I will live with it, but if refinement etc is important, then you will have to tread carefully to get decent drivability.
an obvious solution is to run the narrowest, least aggressive tyre possible in the diameter you need for correct gearing on road, and leave the wider, more aggressive tyres for trip only.
Maybe, 3.9's and a trail tough 6:1 would be sweet for road use- or a 24% reduction high range with WT gears. I guess the answer lies a bit with your expectation of what the car should drive like.
As an aside though, nobody would expect a patrol to drive like stock with 37's on it, so you can't expect a sierra to drive like stock with 31's on it.
sorry if t his doesn;t really answer your question
Steve.
... its just trying to look at what is right I'll most likly keep 31's as daily's an have 33's for play was on the trail tough website ... looking at the 6.4:1 guess you where talking of those ... it says it only has a 17% high range reduction compaired to the trail gear ones which is 20% .... if i am right in my assumption the the one with the least amount of reduction in high would be the best for road driving because it wont have to rev as much to move
one thing I've thought about if i put low gears in is seeing if i could tap a line into the transfer case an connect a oil cooler to the transfer case with a pump in the line so it doesn't over heat as much - extending the life of the gears
... wacky idea[color=green]Vote Earth[/color]
Re: rock hoppers
Yep they sound like the go!want33s wrote:TRANSFER GEARS ....US$475suzuki boy wrote:I have been looling at these!want33s wrote:I ordered a set of gears from LOWRANGE OFFROAD 6.5:1. 20% reduction in high and 187% reduction in low. Should suit 33's and 3.7's. NO QUESTIONS asked replacement guarantee. http://www.lowrangeoffroad.com/samdrivetrain.htm
TRANSFER Rebuid kit ..... US$79
Large Input Shaft ...... US$97
Freight ....... US$100 = US$751 = AU$976
Inflation rate will change this figure daily but you are looking at about $1000. As soon as these go in I get 33's. Then I'll have to make a new rear bar and spare carrier!
A few more weeks then i'll order them!
Built swb sierra, building a lwb sierra ute and have a dmax for family camping
ive been wanting to get the calmini 5.14 when tax time comes around, but they seem quite a bit more dearer then the lowrange- offroad gear, it seems like you can get the 4.9's delievered for under 800 aud, when the current exchange rates, ive emailed them and will hopefully get an response soon.
i run 3.9 centres sitting on 30/31, and i drive highways alot. The lowrange bloke said 6.5 would be too low(20% highrange) and would be revving way to much. i wouldnt mind sitting on 3500rpm - 3800rpm at 100k's. the 4.9's offer a 16% reduction in high. and would make crawl ratio 66:1.
what i cant understand is why the 6.5 gears are cheaper then the 4.9's?
edit: emailed back.
Sorry for this automatic response, but will be out of the office from the 9th
through the 13th of May testing some products on the trails in Moab, Utah.
We will still be returning your e-mails and calls during this time but not as
quick as we would like so please be patient.
Have a great weekend.
Low Range Off-Road
will have to ask them why prices are different.
i run 3.9 centres sitting on 30/31, and i drive highways alot. The lowrange bloke said 6.5 would be too low(20% highrange) and would be revving way to much. i wouldnt mind sitting on 3500rpm - 3800rpm at 100k's. the 4.9's offer a 16% reduction in high. and would make crawl ratio 66:1.
what i cant understand is why the 6.5 gears are cheaper then the 4.9's?
edit: emailed back.
Sorry for this automatic response, but will be out of the office from the 9th
through the 13th of May testing some products on the trails in Moab, Utah.
We will still be returning your e-mails and calls during this time but not as
quick as we would like so please be patient.
Have a great weekend.
Low Range Off-Road
will have to ask them why prices are different.
85 LWB w. FRP Canopy
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
does anyone know what the highrange ratio is for the 4.9:1 tcase? when it says 20% im guessing the ratio would be 1.2:1 for highrange(going on the standard ratio of 1:1, if thats correct)
is there a way to work out how many rpm's at 100k's with 31?
im sure i could work it out, but time and effort
is there a way to work out how many rpm's at 100k's with 31?
im sure i could work it out, but time and effort
85 LWB w. FRP Canopy
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Stock sierra high range is about 1.4:1, so + 20% will be about 1.68:1
If you have stock diffs your cruise revs will be pretty close to stock. - about 17% for tyres or something, +20% for the case.
Steve.
If you have stock diffs your cruise revs will be pretty close to stock. - about 17% for tyres or something, +20% for the case.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
got a reply from lowrange dudes, was asking how much shipping was and why the 6.5's were cheaper then 4.9's.
I get them [the gears] from two different suppliers and the 6.5 gears are ordered in sets of 500 by my supplier so they are able to get them for much better prices.
All prices are quoted in US dollars.
Sean
hi sean,
can you please advise why the 6.5 gears are cheaper than the 4.9's?
was that $110 for shipping in usd?
I get them [the gears] from two different suppliers and the 6.5 gears are ordered in sets of 500 by my supplier so they are able to get them for much better prices.
All prices are quoted in US dollars.
Sean
hi sean,
can you please advise why the 6.5 gears are cheaper than the 4.9's?
was that $110 for shipping in usd?
85 LWB w. FRP Canopy
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
i got a set of 6.5 throught sean at lowrange offroad about a month ago.
i order them on the tuesday and they were at my door in sunny old tamworth nsw on the following monday at 8.30 in the morning .
all up it cost me $716.55 au.
they were sent global express through usps / australia post.
i used paypal and at the time the aussie dolla was at 81c us
i was very impressed
even got two decent lowrange off road stickers for the toolbox
matt
i order them on the tuesday and they were at my door in sunny old tamworth nsw on the following monday at 8.30 in the morning .
all up it cost me $716.55 au.
they were sent global express through usps / australia post.
i used paypal and at the time the aussie dolla was at 81c us
i was very impressed
even got two decent lowrange off road stickers for the toolbox
matt
Who is online
Users browsing this forum: No registered users and 63 guests