Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
building spare wheel carrier for 60 series
Moderators: toaddog, TWISTY, V8Patrol, Moderators
building spare wheel carrier for 60 series
howdy- anyone got any pics or ideas of how to make a double swing-away rear wheel carrier using the stock rear bumber? i'm not sure if the steel is thick enough / strong enough. don't want to build a whole new rear bumber. was thinking of maybe bolting some flat bar to the underside of the top of the bumper and using that to support the outer hinge?
a flat piece above and below the bar with bolt holes to match to bolts through the bar. You can weld a hinge onto these two plates. I bought a homemade job like this on ebay for 100. haven't put it on yet though. and obviously not a double
this is the pic from the ebay page
this is the pic from the ebay page
At first I thought it was a sea anemone, upon closer inspection I realised it was a funky ball of tits from outer space.
Who is online
Users browsing this forum: No registered users and 9 guests