Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

70mm lift – need caster?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 63
Joined: Sat Jan 24, 2004 5:14 pm
Location: sydney

70mm lift – need caster?

Post by frontyMatt »

TJM make a 70mm lift kit for the 100 series, ive been told that i wont need any caster correction with this kit fitted.
I'm a bit skeptical of this, as i was always under the understanding that anything over 50mm will need some caster correction done.

so what are your thoughts and opinions of this?

will it still drive straight without any caster done?

Thanks,
Matt
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Ifs or solid 100ser
plenty of parts on the bench
Top
Posts: 63
Joined: Sat Jan 24, 2004 5:14 pm
Location: sydney

Post by frontyMatt »

sorry..

solid front end
Top
Posts: 342
Joined: Wed Dec 06, 2006 6:09 pm
Location: Sunny Coast

Post by jonamaphone1 »

caster correction bushes will definately help with steering.
mate got and 80 with 3inch lift from arb and they definately used correction bushes.
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

if they don't i'd think it would be right on the limit if you do do the lift through them i'd get it alinged elsewhere and ask them to give you what the castor is at and what the spec is for it i'll look in the book tomorrow at work and see what it should be.
plenty of parts on the bench
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 68 guests