Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

More Power, me too

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 130
Joined: Tue Oct 14, 2003 3:55 pm
Location: Yaroomba

More Power, me too

Post by Hardy »

Hi everybody,

I'm on the case too, been reading the below article with interest.
I have '99 4.0 with K&N, Unichip and straight through exhaust.
I reckon it still has a stick lodged somewhere, but budget & sensibility is a concern.
I would like more low & mid, without losing much from top.

So I'm now looking into a bit of headwork & maybe a cam.
Other advice suggests simply cleaning out any dags & a good valve re-seat. No porting, no polishing.

I have a budget of about $1000, give or take $500.

There are plenty of cams out there - but which one would suit?
Brands, profiles?
Anyone to recommend for headwork in SE Qld?

Any experience & advice appreciated.

Thanks,
Hardy
Top
Posts: 207
Joined: Wed Dec 04, 2002 8:45 am
Location: Over there

Contact:
Contact Bodge

Re: More Power, me too

Post by Bodge »

Hardy wrote:Hi everybody,

Anyone to recommend for headwork in SE Qld?

Any experience & advice appreciated.

Thanks,
Hardy


Careful what you ask for .... :D
The Lucas motto: "Get home before dark."
Top
Posts: 82
Joined: Wed Sep 10, 2003 4:14 pm
Location: Sydney

Contact:
Contact Rangee

Post by Rangee »

go a 217 Dynatech cam from Rovacraft in perth
Virgins !!!
someone has to go first !
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 0 guests