Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
No low beams
No low beams
My low beam in the headlights died yesterday. Im not real good with electrics. The headlights have a narva wiring loom upgrade installed in them so there is only one bulb in the headlight that does both high and low beams. The high beam works but the low doesnt so it cant be the bulb. Anyone have any suggestions?
still could be the bulb as the bulb will have dual filaments. one for high and one low.
Are they fused separatly for high and low?
use a multimeter or another globe and see if there is any volts down at the plug.
take globe out and test with some wire direct onto the batt.
Are they fused separatly for high and low?
use a multimeter or another globe and see if there is any volts down at the plug.
take globe out and test with some wire direct onto the batt.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Who is online
Users browsing this forum: No registered users and 1 guest