Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

36 " on 80

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 25
Joined: Thu Jan 25, 2007 10:01 pm

36 " on 80

Post by 80WEPN »

just bout to fit 36x12.5x16 to my 80, it has 5 inch efs lift has anyone had to cut gards or make any massive changes to fit them under so they dont fuck shit when flexed up????????
Top
Posts: 780
Joined: Wed Apr 26, 2006 7:11 pm
Location: darwin again

Post by simkell »

No they should fit fine
MUD, MUD, GLORIOUS MUD!
Top
Posts: 398
Joined: Mon Jun 21, 2004 7:57 pm
Location: Berwick, Vic

Post by g35me »

you will be right with 5inch
Twin Turbo V8 80 Series Ute with Extra Bits
Top
Posts: 13
Joined: Fri Apr 20, 2007 8:48 pm
Location: mannum

Post by mickdundee.. »

Should be alright, if anything it will touch the rear flaps at flex :cool:
Top
Posts: 668
Joined: Mon May 19, 2003 4:49 pm
Location: Gold Coast

tyres n 80's

Post by Pesky Pete »

I used to run 36 inch swampers under mine with a 3" lift. They were 36x 11.5's though. Now running 38 x 12.5's with a 4" lift and a small guard chop at the rear of the guards. I'd say you have bags of room
Top
Posts: 178
Joined: Fri May 05, 2006 6:57 pm
Location: SE melb

Post by Coogs »

I ran 36x12.5x16 et2 with 3in ridepro lift and 50mm bump stop spacers no dramas.
95 80s gxl 4.5 pet/gas (4 play)
85 MWB73 350chev pet/gas (4 project)
98 TJ Wrangler (4 Wife)
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 14 guests