Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Engine Died - No Spark
Engine Died - No Spark
I have just finished swapping engines between 2 sierras (1.3l carby)... i have no mechanical knowledge at all about anything but so far ive done alright. The battery wont start the car on its own (it IS charged) but it will jump start off another cars power, but the engine was running on its own for several minutes and died. there are is no sign of any spark from the spark leads and i have changed the ignition coil and has made no difference no sign of burnt wiring but i cant garantee that ive wired it correctly... i dont know where to start can anyone help.
If you knew as much as you think you know,
You would realize that you don't know what you thought you knew!... think about it...
"It's a Zuk thing, we wish we could understand"
You would realize that you don't know what you thought you knew!... think about it...
"It's a Zuk thing, we wish we could understand"
Maybe timing belt,
pull the distributor cap off and crank the engine, see if the rotor is turning, if its not the belt is broken.
Mock
pull the distributor cap off and crank the engine, see if the rotor is turning, if its not the belt is broken.
Mock
My photographic Art http://www.redbubble.com/people/ljxtreem
www.dirtcomp.com.au
Sierrajim wrote:
So hurry up, come back, buy a Lada (can't believe i just said that) and we'll go wheelin'.
www.dirtcomp.com.au
Sierrajim wrote:
So hurry up, come back, buy a Lada (can't believe i just said that) and we'll go wheelin'.
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
Re: Engine Died - No Spark
yamadafaka wrote:I have just finished swapping engines between 2 sierras (1.3l carby)... i have no mechanical knowledge at all about anything but so far ive done alright. The battery wont start the car on its own (it IS charged) but it will jump start off another cars power, but the engine was running on its own for several minutes and died. there are is no sign of any spark from the spark leads and i have changed the ignition coil and has made no difference no sign of burnt wiring but i cant garantee that ive wired it correctly... i dont know where to start can anyone help.
Did you connect your alternator up right, if it started and ran without the alternator topping up the battery, then it iwll slowly discharge till it dies completly.
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
I have connected the altinator correctly it is charging the battery but the battery still cant start the car on its own....
and the rotor does spin when the engine is trying to turnover....
this is probably a stupid question but i have 1 earth lead about 1.5 foot long attached to the negative terminal and i cant find the place to bolt it, engine or body??? keeping in mind that there is already 1 wire going from negative terminal to the firewall and another to the wheel arch on the other side of the engine bay..
im soo lost...
any help is appreciated
and the rotor does spin when the engine is trying to turnover....
this is probably a stupid question but i have 1 earth lead about 1.5 foot long attached to the negative terminal and i cant find the place to bolt it, engine or body??? keeping in mind that there is already 1 wire going from negative terminal to the firewall and another to the wheel arch on the other side of the engine bay..
im soo lost...
any help is appreciated
If you knew as much as you think you know,
You would realize that you don't know what you thought you knew!... think about it...
"It's a Zuk thing, we wish we could understand"
You would realize that you don't know what you thought you knew!... think about it...
"It's a Zuk thing, we wish we could understand"
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
yamadafaka wrote:I have connected the altinator correctly it is charging the battery but the battery still cant start the car on its own....
and the rotor does spin when the engine is trying to turnover....
this is probably a stupid question but i have 1 earth lead about 1.5 foot long attached to the negative terminal and i cant find the place to bolt it, engine or body??? keeping in mind that there is already 1 wire going from negative terminal to the firewall and another to the wheel arch on the other side of the engine bay..
im soo lost...
any help is appreciated
Is it a large gauge cable. It should mount on the bell housing near the starter. Withough this, you will have earthign problems.
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
lay80n wrote:yamadafaka wrote:Is it a large gauge cable. It should mount on the bell housing near the starter. Withough this, you will have earthign problems.
it is a thick ass cable, does it connect to the bolt just below the bottom started motor bolt...?
If you knew as much as you think you know,
You would realize that you don't know what you thought you knew!... think about it...
"It's a Zuk thing, we wish we could understand"
You would realize that you don't know what you thought you knew!... think about it...
"It's a Zuk thing, we wish we could understand"
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
thanx mate thats one problem sorted, ill check that in the mornin hopfully im one step closer to it goin againlay80n wrote:Somewhere down there
Layto....
If you knew as much as you think you know,
You would realize that you don't know what you thought you knew!... think about it...
"It's a Zuk thing, we wish we could understand"
You would realize that you don't know what you thought you knew!... think about it...
"It's a Zuk thing, we wish we could understand"
Who is online
Users browsing this forum: No registered users and 2 guests