Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Painting a bull bar, Powder coat, paint, or something else?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 300
Joined: Sun May 20, 2007 2:22 am
Location: Toowoomba QLD

Post by 90Mav »

I know it is all to late now, but for future referance, you should always use etch primer on gal or alloy...
Thrashed '90 Leaf spring Maverick ute, TD42, 2" EFS lift. 36 Swampers.
Top
Posts: 8556
Joined: Mon Jun 13, 2005 9:34 pm
Location: Sydney

Post by RockyF75 »

chimpboy wrote:Bugger now you've gotta tidy up the rest of the car too ;)
I've been copping a bit of flak about that lately, stuff like "bars the nicest thing on the car" etc etc :roll: :rofl:

It looks really really neat, and its great as far as approach angle goes cause there's no overhang from it (spring perches are the lowest point still) but the closeness has me a little concerned as to protection, there's really no 'crush' zone or anything between it and the panels. But its got 4 mounting brackets as apposed to the usual 2 so hopefully that helps a bit.
60 + Turbo, 33"s :armsup:
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 9 guests