Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80s cv joints

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 13
Joined: Wed Mar 10, 2004 12:10 pm
Location: Sydney

80s cv joints

Post by grott »

In what month/year did they change 80 series cv joints to the longer splines. Can I put the long ones on a 5/92 model if I change the drive flange as well or do I allready have the long ones? Thanks in advance for any info.
Top
Posts: 1719
Joined: Sun Jan 25, 2004 11:45 am
Location: Brisbane

Contact:
Contact RV80

Post by RV80 »

Its either 94 or after 94 they changed them, if you get the thicker flanges you'll be fine...
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

8/92 was the last constant gxl/sahara to have short c/v. After that, the new 4.5 motor came out with bigger brakes etc etc, all constants from then on had longer c/v and drive plate. If you change both, it all works. Now..here is the twist....all part time 80's kept the short ones due to thesame FWH being kept.
Andrew
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 56 guests