I'm new to Landcruisers so this might seem a stupid question.
I have uk spec '93 4.2 auto and have fitted the center diff lock dash switch. I'm also going to do the 7 pin mod so that i have a completly manual CDL.
I was wondering if, once i've done the 7 pin mod, is there anything stopping me shifting between low and high range on the move. I'm mainly thinking that it would be handy to be able to get going in low with a trailer on a steep uphill and change into high once i've got momentum going.
Also, can i engage the CDL on the move or will i do damage. Cheers, G
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Shifting between high and low range
Moderators: toaddog, Elmo, DUDELUX
lock
Locking the CDL on the move should be ok but deffinatelly not low to high or vise versa.
Who is online
Users browsing this forum: No registered users and 0 guests