Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Zook Vibration Problem Is it clutch or diff?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 79
Joined: Tue Jul 18, 2006 7:27 pm
Location: NSW

Zook Vibration Problem Is it clutch or diff?

Post by JacZook »

Hi Alll

I have a problem with my Zook.

I have a vibration driving right across the rev range. When not in gear idles ok but when in gear i feel a bad vibration when driving. Gearing down I can feel it. Makes me think it is a clutch problem. Clutch is not slipping thou! If it was the diff or drive line it should do when rolling not in gear.
Any ideas, Suggestion would be great

Cheers
JacZook
Top
Posts: 870
Joined: Sat Jun 03, 2006 5:32 pm
Location: sydney

Post by MART »

Check all the mounts on the driveline , When rolling there is no torque to flex mounts , also when did it start and where did it start , Cheers Paul
BLOWNZUK 1.3 efi,sc14 supercharger,hilux diffs,detroit lockers,stage 4 rockhopper,6 point cage,35 muddies.
Top
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

vibration

Post by want33s »

Have a good look at all your uni's.
Top
Posts: 286
Joined: Tue May 31, 2005 11:13 pm
Location: Perth WA

Post by smileysmoke »

unis + tailshaft in phase.
i had that issue with my old zook. was partly uni joints and my tailshaft was out of phase.. only by a few splines but enough to shake the jibbers out of me and the zook.
Top
Posts: 424
Joined: Sun Jun 11, 2006 9:15 pm
Location: PMQ

Post by =SKB= »

MART wrote:Check all the mounts on the driveline , When rolling there is no torque to flex mounts , also when did it start and where did it start , Cheers Paul
x2

Specially the rear gearbox mount. The bolts can pull through and flog around when under load.
Top
Posts: 6221
Joined: Tue May 31, 2005 12:51 pm
Location: Sydney

Post by v840 »

Make sure you check your jackshaft uni's too.
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 3 guests