Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Choosing a hand winch

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

What would the minimum sized Tirfor be for a LWB GQ?
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

2500kg pulling/1600kg lifting.

cheers
Top
Posts: 56
Joined: Wed Nov 09, 2005 11:55 pm

Post by jungle_surfer »

Has anyone ever used a Hi-Lift (or equiv) jack as a winch?
Top
Posts: 389
Joined: Sat Mar 05, 2005 8:06 am
Location: campbelltown/penriff

winch

Post by noelb1 »

yeah but it is hard work and you get less pull than the emergency hanwinch
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

jungle_surfer wrote:Has anyone ever used a Hi-Lift (or equiv) jack as a winch?
A couple of times - once just to hold a vehicle in place while we reset the "real" handwinch.

It will do the job if you don't have anything else.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

Quick note in relation to cable failure and hand winches - the cable used in hand winches is much much heavier than that used in an electric winch as the jaws of the winch actually have to grab it.

The shear pins in the handle will fail or the jaws will slip well before the cable could ever break.

I have an ARB magnum ATM (that I am yes to use) but I have used a old (late 80s) "brano" hand winch heaps, often fur puuling my 2500kg Gwagen. It's hard work but has always done the job.

I don't particularly like electric winches - they tend to have limited use and usefullness if you have well set up car and travel with others.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 22 guests