Need to remove brake shaft from high mount to put in drilled and
tapped shaft.
What is the easiest way to get shaft cap and shaft out.?
Was planning on hammer and brass punch, but am having trouble
getting the inside cap off before punching out the shaft
Any ideas??
ps. the cap I'm talking about is one on the drum/motor side of the housing.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
High mount brake shaft!!!!
Moderators: toaddog, TWISTY, V8Patrol, Moderators
High mount brake shaft!!!!
What could possibly go wrong????
Who is online
Users browsing this forum: No registered users and 0 guests