Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Yank needing a part # for 100 series Cruiser!

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 5
Joined: Thu Mar 20, 2003 10:54 am
Location: Austin, Texas - USA

Yank needing a part # for 100 series Cruiser!

Post by 60seriesguy »

Ok, maybe not a yank just yet, but a transplanted Venezuelan "Cruiserhead" living in the US....please bear with me! :)

So it turns out that in the land of 10 million accessories, you can get 22" bling wheels for a 100 series Cruiser in eight different finishes, but you can't get the good old steel wheels that come in the "poverty pack" 100 series around the world...in fact, you can't get *any* steel wheel for the 100 series, period!

I got a friendly Toyota parts guy that's helped me put non-US parts # in the system before, but I need help from fellow Cruiserheads in Australia. Does anyone have the Toyota parts # for the NON-split steel wheel that comes on some of your 100 series Cruisers? Split wheels are illegal in a lot of US states because of liability (don't even get me started on that one). It *might* be the same part number as the non-split wheel that comes on the higher-end 76-78-79 Series Cruisers.

If anyone can help, I would *really* appreciate it, I recently bought a UZJ100 to share stables with my Cummins 4BT-powered FJ62, and I'd like to get rid of the chrome alloy wheels it came with and run steel wheels on it.

Thanks in advance for your help!!!

Cheers!

Henry
"You can ask me anything about this Land Cruiser except how much money I have in it, and what kind of mileage it gets"
1991 FJ62 - Third World spec
1999 UZJ100 - The Civilized Wagon
Posts: 959
Joined: Fri Mar 07, 2003 6:51 pm
Location: Gladstone QLD

Post by Kramer »

Is your cruiser IFS? I have a set of these rims that fit the IFS 100 series just sitting there I could send them over if your willing to pay for the freight cause I am sick of them sitting here. I was sold them by the wreckers with their promise it would fit my solid axle cruiser, paid them $250 and went and had some tyres fitted on them to get home and guess what they don't fit :cry: anyways I bought some sunny's and tried to take the other rims back to the wreckers but they wouldn't be in it so they are just sitting there now. BTW these are the standard wide rims for the IFS.
All Your Beer Are Belong To Us!
www.tour-oz.net
Posts: 5
Joined: Thu Mar 20, 2003 10:54 am
Location: Austin, Texas - USA

Post by 60seriesguy »

Kramer wrote:Is your cruiser IFS? I have a set of these rims that fit the IFS 100 series just sitting there I could send them over if your willing to pay for the freight cause I am sick of them sitting here. I was sold them by the wreckers with their promise it would fit my solid axle cruiser, paid them $250 and went and had some tyres fitted on them to get home and guess what they don't fit :cry: anyways I bought some sunny's and tried to take the other rims back to the wreckers but they wouldn't be in it so they are just sitting there now. BTW these are the standard wide rims for the IFS.
I appreciate the offer, but the shipping would be cost prohibitive! My Cruiser is IFS, that's the only version we got here (V8 petrol, IFS, full luxo). Any chance there's a part number stamped on the inner band of the wheel?

Sunraysia's aren't available here, either....

Thanks again for the offer!
"You can ask me anything about this Land Cruiser except how much money I have in it, and what kind of mileage it gets"
1991 FJ62 - Third World spec
1999 UZJ100 - The Civilized Wagon
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Are you hoping that Toyota USA will have these in stock?
Posts: 106
Joined: Sun Jun 26, 2005 12:37 pm

Post by chook05 »

Kramer wrote: I was sold them by the wreckers with their promise it would fit my solid axle cruiser, paid them $250 and went and had some tyres fitted on them to get home and guess what they don't fit :cry: anyways I bought some sunny's and tried to take the other rims back to the wreckers but they wouldn't be in it
Any chance you could pm me the name of the wreckers that sold them to you.
Posts: 959
Joined: Fri Mar 07, 2003 6:51 pm
Location: Gladstone QLD

Post by Kramer »

60seriesguy wrote:
Kramer wrote:Is your cruiser IFS? I have a set of these rims that fit the IFS 100 series just sitting there I could send them over if your willing to pay for the freight cause I am sick of them sitting here. I was sold them by the wreckers with their promise it would fit my solid axle cruiser, paid them $250 and went and had some tyres fitted on them to get home and guess what they don't fit :cry: anyways I bought some sunny's and tried to take the other rims back to the wreckers but they wouldn't be in it so they are just sitting there now. BTW these are the standard wide rims for the IFS.
I appreciate the offer, but the shipping would be cost prohibitive! My Cruiser is IFS, that's the only version we got here (V8 petrol, IFS, full luxo). Any chance there's a part number stamped on the inner band of the wheel?

Sunraysia's aren't available here, either....

Thanks again for the offer!
I will check when I get home this afternoon, and post my findings.
All Your Beer Are Belong To Us!
www.tour-oz.net
Posts: 959
Joined: Fri Mar 07, 2003 6:51 pm
Location: Gladstone QLD

Post by Kramer »

Sorry for the late reply but I took off early for my long weekend :D

The only numbers printed on the rims are "J16x8 JJ DOT TOPY 50903 B 5.0"

That is exactly the way it is written.
All Your Beer Are Belong To Us!
www.tour-oz.net
Posts: 58
Joined: Mon Jan 09, 2006 10:17 pm
Location: Victoria

Post by coights 40th »

I rang a couple of toyota dealers today for you and they have given me a toyota part number 42601 606 00.
They told me that this was the correct number for the rims you are after although I'm relying on their knowledge as the computer listing is as clear as mud. :roll:
I hope this helps :)
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests