Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

3/4 eliptic on mq swb

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 389
Joined: Sat Mar 05, 2005 8:06 am
Location: campbelltown/penriff

3/4 eliptic on mq swb

Post by noelb1 »

Hi all,
I have an 85 swb mq/k and I want to go 3/4 eliptic on the back I have been through the bible, got a q about where to mount the top spring when going 3/4 eliptic, should it be pinned from the cetrerline of the axle or further back i.e shorter top spring, it will be sua 2" springs and 2" shackles.

any help /input appreciated .

Noel
Top
User avatar
lay80n
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Contact:
Contact lay80n

Post by lay80n »

Shoot Jeff (screwy screwball) a message, his old green tree magnet had a 3/4 eliptic rear end.

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

On my Zuk I used a standard spring. I cut it about 4" longer than the centre pin and then pinned it on the centre, if that makes sense.
Ransom note = demand + collage
Top
Posts: 389
Joined: Sat Mar 05, 2005 8:06 am
Location: campbelltown/penriff

3/4 eliptic on mq swb

Post by noelb1 »

yep makes sense grimbo thats what I was after, thanks lay80n i will shoot him off a pm, being sua prob go 35's would it need a trac bar? only going to be an injected l28
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests