Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

rather bad coolant leak........

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 149
Joined: Sun Feb 23, 2003 8:41 pm
Location: nsw

rather bad coolant leak........

Post by matt_w »

i was just wodering what coolant hoses etc... are behind the plenum chamber, i havnt pulled it apart yet, was wondering why im getting a huge leak, could a hose have broken behind there? is it easy to do?
the leak is pooling in the valley gasket i think, but only behind the plenum chamber, thats only looking with a torch thus far, any help?
Top
Posts: 176
Joined: Sat Jun 16, 2007 8:18 am
Location: New Zealand

Post by bigbad »

Heater hoses maybe
Top
Posts: 149
Joined: Sun Feb 23, 2003 8:41 pm
Location: nsw

Post by matt_w »

if it is the heater hoses how hard is it to get to? do i need to pull off more than the plenum chamber?
Top
Posts: 2384
Joined: Mon Mar 31, 2003 10:05 am
Location: Brisbane or 169.254.243.241

Post by RaginRover »

it is pretty easy to get to I didn't need to take the top off - if you remove the plenium you will need to take the throttle cable and kick down off - which is easy enough.

Tom
"It was just an ordinary day, and you saw them. There were guys in their Porsches, "Look at me in my Porsche, ha ha!" and they were overtaken by a van. Driven by a girl!"
Top
Posts: 149
Joined: Sun Feb 23, 2003 8:41 pm
Location: nsw

Post by matt_w »

ok, now i have changed the heater hoses even tho they looked ok,

still the same problem.... any other things that could be leeking coolant?

i cant really do a pressure test on it where it is, cos i dont have a tester

any help anyone??
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Re: rather bad coolant leak........

Post by chimpboy »

matt_w wrote:i was just wodering what coolant hoses etc... are behind the plenum chamber, i havnt pulled it apart yet, was wondering why im getting a huge leak, could a hose have broken behind there? is it easy to do?
the leak is pooling in the valley gasket i think, but only behind the plenum chamber, thats only looking with a torch thus far, any help?
I would have said heater hoses, but one thought, just because it's pooling at the back doesn't mean that's where it's leaking.

I sometimes get a box of tissues and poke a dry tissue into various places I can't see into, and see where it comes out wet.

Yes, I know that sounds dodgy :)
This is not legal advice.
Top
Posts: 60
Joined: Mon Nov 20, 2006 1:55 pm
Location: mornington peninsula

Post by oops »

yeah i had that on my car once i put the engine back together, and i thought it was coming from the heater hoses, as it was pooling in the back on the valley cover, but it ended up being from the back of the water pump, tightened all the hose clamps up around there, and no problems anymore
Top
Posts: 149
Joined: Sun Feb 23, 2003 8:41 pm
Location: nsw

Post by matt_w »

i finally got the problem sorted after taking it to mech. was one of the short hoses at front of motor, hard to get to still
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 28 guests