Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
how much oil?
how much oil?
i have a 87 suzuki sierra does anyone no the exact amount of oil to put in the 5 speed gbox coz i cant get the side filler thing off but i can get the bottom one off so i was thinking of just filling it from the gear stick bit
how much oil?
Gearbox takes 1.3 litres. Transfer takes 0.8 Litre.
http://www.datateck.com.au/lube/castr_a ... Model=2863
http://www.datateck.com.au/lube/castr_a ... Model=2863
If you have a steady hand, both can be filled from the shifter hole once the shifters have been removed.
It's much easier than trying to pump it in through the fill plugs, but unless you are very confident with the capacity it is still worth doing with the fill plug removed so you get the level right.
Watch out for gear oil on the carpet though
the smell never comes out.
It's much easier than trying to pump it in through the fill plugs, but unless you are very confident with the capacity it is still worth doing with the fill plug removed so you get the level right.
Watch out for gear oil on the carpet though
the smell never comes out.[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Ok, had a look, and by "shifter hole" what exactly do you mean?
Do you mean:
- take the gear nob off and pour into the hole at the top of the gear stick?
- take the rubber gear surround, nob and stick out and fill it through there?
- or something else?
Thanks
Do you mean:
- take the gear nob off and pour into the hole at the top of the gear stick?
- take the rubber gear surround, nob and stick out and fill it through there?
- or something else?
Thanks
'94 WT - 50mm shackles - 40mm OME MD springs - hammered seams - no front bar - 31" Simex 'pedes
The more you take out, the easier it will be for you. To an extent ayway.
Take the little rubber boot off around the gearstick base, and there should be a couple of screws or bolts holding the stick in with a flat plate. Remove the plate, and the stick should come out too. Takes 2 minutes tops. You probably will then have enough room, consider sticking a clean funnel or something in there to make the job easier, and cleaner.
Take the little rubber boot off around the gearstick base, and there should be a couple of screws or bolts holding the stick in with a flat plate. Remove the plate, and the stick should come out too. Takes 2 minutes tops. You probably will then have enough room, consider sticking a clean funnel or something in there to make the job easier, and cleaner.
Wheeling on completely wicked angles, without even looking stable.
Cheers highway-star... never done it before so just needed a bit of a walk thru.
Day off tomorrow so will give it a go then!
Also prolly need to do diff oil... anything tricky there or is it just undo both bolts, let it drain, do up bottom bolt, fill from top bolt?
Day off tomorrow so will give it a go then!
Also prolly need to do diff oil... anything tricky there or is it just undo both bolts, let it drain, do up bottom bolt, fill from top bolt?
'94 WT - 50mm shackles - 40mm OME MD springs - hammered seams - no front bar - 31" Simex 'pedes
Diffs are easy. Just unscrew the top filler bolt first, that way the draining oil is easily replaced by incoming air.
Hardest bit is getting the oil into the filler plug. I use an old hand oil pump Dads got. He bought it originally to pump 2 stroke oil out of drums into his LJ50.
Hardest bit is getting the oil into the filler plug. I use an old hand oil pump Dads got. He bought it originally to pump 2 stroke oil out of drums into his LJ50.
Wheeling on completely wicked angles, without even looking stable.
Who is online
Users browsing this forum: No registered users and 79 guests