My LJ70, or bundy, presently has diff ratios at 4.88 for a 2LT engine. The 1KZ half cut I am installing came with two axles, diff ratios at 5.33.
So the questions are:
1. Should I change the diff ratios?
2. I am concerned about my locker which was bought for the diff ratios at 4.88. Would the locker be ok if I did install the 5.33 ratio diffs.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
A small little question of diff ratios....
Moderators: toaddog, Elmo, DUDELUX
Sorry, I don't know much about the little trucks, but
1. The 1KZ is a 3 litre, so bigger displacement, more torque which should equal less need to further lower the diff ratios (from a performance prespective anyhow). I'd stick with your current ones.
2. 5.33 ratio sounds wrong to me. 5.29 is a Toyota ratio
1. The 1KZ is a 3 litre, so bigger displacement, more torque which should equal less need to further lower the diff ratios (from a performance prespective anyhow). I'd stick with your current ones.
2. 5.33 ratio sounds wrong to me. 5.29 is a Toyota ratio
Greg G
2000 HDJ105
2000 HDJ105
Who is online
Users browsing this forum: No registered users and 0 guests