Milford Cargo Barrier in 100 Series - Help

[me3@neuralfibre.com]

Does anyone have a Milford Cargo barrier fitted to their 100 series? If yes, could you tell me what it mounts to. I picked one up second hand for a reasonable price, but get a nasty feeling I may need to a fitting kit to add mount points. I am starting to think it doesn't mount to the factory handles etc.

Any help appreciated

Thanx
Paul

[just cruizin']

My mounting points were all done by the installer. The top mounts are inbetween the factory handle holes, my handles are still fitted, bit of a bugger to remove the barrier though. Bottom mounts are between the child seat strap mounts from memory, the barrier sits almost on the join of the carpet.

[yfz]

You will need the kit to suit and the instructions as holes need to be drilled and mounts fitted.

[BEU77y]

We had this very same problem. The mount kit is worth around $115 from memory.

[CRUIZED]

Have fun fitting it yourself I fittied my own -prick of a job drilling a hole in the upper shell between the handles and then getting the backing plate in the right place Took me about 5 hours and a lota swearing First side took about 4hrs when I worked it out the second side took 1 hr
I would pay someone too install it as Im sure they done it a 1000 times and the could do it with their eyes closed!!!!!!!

[DNA Off Road]

We had this very same problem. The mount kit is worth around $115 from memory.

You should be able to get the fitting kit for $80

Cheers