Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
I normally place a large piece of hardwood under the sump and jack from there. Undo nuts 1, 2 and bolts 3, 4. Fit new mount to bracket then slip into bracket on engine. Nip up nuts 1 & 2 then lower engine until bolts 3 & 4 line up. Tighten everything and remove the jack. Probably not recommended Suzuki method but thats how I do it.
Should be plenty of flex in the rear mount. If you undo it there is a risk the box could fall off the mount which woudl cause everhthing to twist.... a big PITA.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Probably not recommended Suzuki method but thats how I do it.