Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Cheap Slotted brake rotors?
Cheap Slotted brake rotors?
As part of the evolution path for the GQ I am looking at replacing the disk rotors on the Patrol with slotted rotors. I assume these give a little better breaking offroad eapecially when wet or covered in mud.......
I have been quoted $139 a pair for RDA brand slotted rotors.
Is this a good price and if not where do you buy them from cheaper???
I have been quoted $139 a pair for RDA brand slotted rotors.
Is this a good price and if not where do you buy them from cheaper???
A little birdy told me there's a discount voucher in 4WD Monthly Issue 108 (out in newsagents now) that includes a voucher for DBA slotted rotors for $99 from Supercheap Auto...
Okay so that totals $108 if you include the price of the mag but hey the issue has Tuff Truck coverage in it and a 20 buck saving's a 20 buck saving!
Okay so that totals $108 if you include the price of the mag but hey the issue has Tuff Truck coverage in it and a 20 buck saving's a 20 buck saving!
Re: Cheap Slotted brake rotors?
Yoy sure its $139 a PAIR thats very cheap. I got some DBA sloted trade for $95 each I would be surprise if you can buy them cheaperjtraf wrote:As part of the evolution path for the GQ I am looking at replacing the disk rotors on the Patrol with slotted rotors. I assume these give a little better breaking offroad eapecially when wet or covered in mud.......
I have been quoted $139 a pair for RDA brand slotted rotors.
Is this a good price and if not where do you buy them from cheaper???
Posts: 1931
Joined: Sun Jun 22, 2003 10:29 am
Joined: Sun Jun 22, 2003 10:29 am
Location: Everything 4WD, 86 Camms Rd Cranbourne
Contact:
I'm interested to see oppions on this?GUJohnno wrote:There's a few different variants of the slotted rotors available. Some, I think, are supposed to be better at cooling.
Which ones have you guys used?
I got a GQ with 4 wheel discs how much better are the slotted discs for $99 a pair over the stocko discs i use at the moment?
Cheers
Rick.
I have a set on the front of mine ....found out the hard way that ANY pads with 4WD written on em are no bloody good ....way too hard and squeal like a cornered pig.
I used the ferodo target ones...and once they are warmed up a bit ....work really well ....and are out on their own when towing camper...so softer pads are the go
And I paid just on $100 each for em ...plus pads
Cheers Keith
I used the ferodo target ones...and once they are warmed up a bit ....work really well ....and are out on their own when towing camper...so softer pads are the go
And I paid just on $100 each for em ...plus pads
Cheers Keith
Nuthin is ever the same once I own it !!
let me see if ive got this right........ you want CHEAP rotors? what about stopping ability, performance, durability etc..... you want to go cheap on a VERY important item? i hope you dont value anything or anyone that you take in your vehicle! if you want cheap, ive got some mates that could machine a set up for you out of cheap off cuts? they might not stop your vehicle but they will be slotted and cheap!
just my two cents worth!
just my two cents worth!
[quote="full-boost"]let me see if ive got this right........ you want CHEAP rotors? what about stopping ability, performance, durability etc..... you want to go cheap on a VERY important item? i hope you dont value anything or anyone that you take in your vehicle! if you want cheap, ive got some mates that could machine a set up for you out of cheap off cuts? they might not stop your vehicle but they will be slotted and cheap!
just my two cents worth!
X 2
Cheers Keith
just my two cents worth!
X 2
Cheers Keith
Nuthin is ever the same once I own it !!
i paid around 200 for the pair for mine,
im verry happy with the stoping power it has now
and thats in a heavier GU not a GQ
im verry happy with the stoping power it has now
and thats in a heavier GU not a GQ
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
Posts: 1931
Joined: Sun Jun 22, 2003 10:29 am
Joined: Sun Jun 22, 2003 10:29 am
Location: Everything 4WD, 86 Camms Rd Cranbourne
Contact:
THe RDA brand doesn't look like they're quite the same quallity as the DBA brand. But may well be better than what you have as standard.
RDA
http://www.rdabrakes.com.au/
DBA
www.dba.com.au
Any one with real life experience with either of these brands?
Was it worth while?
What brake pads do you run with them?
Cheers,
Johnno
RDA
http://www.rdabrakes.com.au/
DBA
www.dba.com.au
Any one with real life experience with either of these brands?
Was it worth while?
What brake pads do you run with them?
Cheers,
Johnno
My club
www.vfwdc.com
My store
Everything 4WD
86 Camms Road Cranbourne
www.everything4wd.com.au
sales@everything4wd.com.au
Phone: 03 59955055
www.vfwdc.com
My store
Everything 4WD
86 Camms Road Cranbourne
www.everything4wd.com.au
sales@everything4wd.com.au
Phone: 03 59955055
I've been using dba slotted rotors for about a year and replaced the pads with bendix 4x4 pads at the same time. I've noticed a small amount of difference to stopping power whether it was from the pads or rotors who knows. I figured they needed to be replaced so may aswell improve on standard. They aren't that expensive anyway.
1989 Ford Maverick Turbo Diesel Tourer
4" spring lift 2" body lift
33" MT/R's
4" spring lift 2" body lift
33" MT/R's
I have sold both RDA and DBA slotted and standard discs in the past and not once had a problem with either. RDA is made in china and DBA is (was) made in Australia. It has been my experience that the pads cause more problems than the discs. Some people like bendix 4WD and then others find they squeak. QFM seem to make a good pad and made locally.
RDA also make pads but i do not recomend them for 4WD........
cheers
RDA also make pads but i do not recomend them for 4WD........
cheers
BigMav wrote:I've been using dba slotted rotors for about a year and replaced the pads with bendix 4x4 pads at the same time. I've noticed a small amount of difference to stopping power whether it was from the pads or rotors who knows. I figured they needed to be replaced so may aswell improve on standard. They aren't that expensive anyway.
thats basically the reason i did it too
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
i sell rda at work.they seem to be great quality very smooth to. there around the same price as dba. there break pads are good to. we are the only stockist in moe/warragal and surounding area's if any questions ask and i can find out stuff for u
cheers adam
cheers adam
1993 Gq lwb with added xtra's :) sold
fj60,lifted,35s,33s for daily, 3f power!
fj60,lifted,35s,33s for daily, 3f power!
Posts: 1931
Joined: Sun Jun 22, 2003 10:29 am
Joined: Sun Jun 22, 2003 10:29 am
Location: Everything 4WD, 86 Camms Rd Cranbourne
Contact:
I've got the DBA slotted rotors on my GQ and this is my second set of them. I used to use Bendix 4x4 pads but they are bad news on the rotors and scored them to hell. Every time I had them machined and put Bendix back on I had the same problems. I've since gone back to standard Nissan pads and compared to Bendix, they have better feel, get up to temp sooner, are better under braking and don't wear out the rotors like the Bendix ones.
Regards Andrew.
Regards Andrew.
We are Tig welders, gravity doesn't worry us.
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
uncle Bazzle always said OEM pads were best.. wonder if that is same for GUawill4x4 wrote:I've got the DBA slotted rotors on my GQ and this is my second set of them. I used to use Bendix 4x4 pads but they are bad news on the rotors and scored them to hell. Every time I had them machined and put Bendix back on I had the same problems. I've since gone back to standard Nissan pads and compared to Bendix, they have better feel, get up to temp sooner, are better under braking and don't wear out the rotors like the Bendix ones.
Regards Andrew.
Who is online
Users browsing this forum: No registered users and 0 guests