Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

40 series and 70 series diffs the same?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 46
Joined: Sat Jul 24, 2004 5:30 pm
Location: warragul

40 series and 70 series diffs the same?

Post by cruiserkid »

I have a mate who has just blown the diff in his 45 series cruiser.
I have s spare diff out of a BJ70 sitting here.
Will the centre out of the 70 series fit in the 45 series?.
Are the axles the same?.
Or would it be easier to put the whole diff in?.
91 mav, 35"simex's, front and rear air lockers, 5" lift.
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Re: 40 series and 70 series diffs the same?

Post by Shadow »

cruiserkid wrote:I have a mate who has just blown the diff in his 45 series cruiser.
I have s spare diff out of a BJ70 sitting here.
Will the centre out of the 70 series fit in the 45 series?.
Are the axles the same?.
Or would it be easier to put the whole diff in?.
bj70 is the SWB ? i think it has hilux size diff center if im not mistaken.
Top
Posts: 46
Joined: Sat Jul 24, 2004 5:30 pm
Location: warragul

Post by cruiserkid »

The BJ70 has got the Landcruiser diffs.
It was the petrol model Bunderas that had the hilux diffs.
Mine is not a Bundera.
91 mav, 35"simex's, front and rear air lockers, 5" lift.
Top
Posts: 253
Joined: Fri Dec 09, 2005 9:19 pm
Location: Melbourne

Contact:
Contact tom_286

Post by tom_286 »

I have a bj73 and yes a 7x series (earlyer 7x series, not the smaller front or bundy) diff will fit into the 45. You most likly will find differances in bearing size and spline on the pinion/flange but if your replacing the whole center it should all bolt up.


Tom
Top
Posts: 46
Joined: Sat Jul 24, 2004 5:30 pm
Location: warragul

Post by cruiserkid »

Thanks,
We will be tackling this tonight.
91 mav, 35"simex's, front and rear air lockers, 5" lift.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 11 guests