Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

transfer case stick slipping out

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 12
Joined: Thu Jun 07, 2007 4:39 pm
Location: sydney

transfer case stick slipping out

Post by cambo au »

i have a 92 single cab hilux every now and then if i am changing from 4wd low or high the lever pops from between the two rods inside the box i have to stop take the boots of undo the top of the box slide one of the rods back put the lever back in and its all sweet is this a comon problem or is there something going on i cant see
thanks in advance
chris
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

mine does this was going to pull mine out and measure it compaired with a mates one or just go to the wreckers and get another or possably weld and grind it back to what it should be.
plenty of parts on the bench
Top
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Contact:
Contact ausyota

Post by ausyota »

Tis a common problem.
Mine did it.
I just took out the transfer shifter and MIGed the end a bit and ground it square and it is all good again.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

ausyota wrote:Tis a common problem.
Mine did it.
I just took out the transfer shifter and MIGed the end a bit and ground it square and it is all good again.
sweet found something to do on weekend it was realy starting to s :bad-words: t me
plenty of parts on the bench
Top
Posts: 12
Joined: Thu Jun 07, 2007 4:39 pm
Location: sydney

Post by cambo au »

thanks guys i will get on to it it has only done it a few times but that is enough
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest