Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ transfer into GU

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 3739
Joined: Sat Dec 11, 2004 10:10 pm

GQ transfer into GU

Post by mickyd555 »

will it bolt straight up?

its from a 4.2 EFI

Couldnt find anything in search but im sure it would be there somewhere.
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: GQ transfer into GU

Post by bogged »

Im fairly sure they are a straight fit up, as I have seen ads on here and elsewhere for people swapping Tfer cases with rockhoppers for GQ/GU...
Top
Posts: 326
Joined: Thu Sep 30, 2004 6:37 pm
Location: Capalaba

Contact:
Contact bowtie landie

Post by bowtie landie »

As far as I am aware the only difference - mainly in the later GUs - is the selector. I haven't tried to interchange the selectors but we have fit a series 1 or 2 GU Transfercase onto a GQ and visa versa.

Peter K.
Top
Posts: 3739
Joined: Sat Dec 11, 2004 10:10 pm

Post by mickyd555 »

bowtie landie wrote:As far as I am aware the only difference - mainly in the later GUs - is the selector. I haven't tried to interchange the selectors but we have fit a series 1 or 2 GU Transfercase onto a GQ and visa versa.

Peter K.
Thanks Peter

Its for my 00 ute so it should be ok from the sounds of it :armsup:
Top
Posts: 3739
Joined: Sat Dec 11, 2004 10:10 pm

Post by mickyd555 »

Does anyone know how i can check what gearset is in a transfer case when the car is undrivable??

Will i be able to turn it by hand and count?
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

put in low turn input shaft count the turns on out put shaft, std is 2.02 to 1, 85% is 3.74 to 1 check marks adapters if other ratio is required
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 4 guests