Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Are any 4WD rims same stud pattern as a falcon?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

get new speedy rims, set you back $100 a pair and they will fit.
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Posts: 542
Joined: Thu May 05, 2005 8:53 pm
Location: Lysterfield

Post by krimnl »

XH falcon ute (1996-1999) , 1 tonne & outback used a sunraysia style 15" steel wheel, or just buy a cheap set of 15" alloys
Posts: 1253
Joined: Thu Dec 12, 2002 1:34 am
Location: QLD

Post by Jeeps »

Wooders wrote:
CRUSHU wrote:TJ jeep is the only 4x4 with the 5 on 4.5" pattern, Same as Falcon

Early Jeep, suzuki, Lada etc etc in 5 on 5.5"

Range rover etc is 5 on 6.5"
Bing ....
BUT the XJ, KJ and ZJ also have 5 on 4.5" pattern ;)
Hey wooders, i know that KJ's can't handle 15" rims because the disc rotors are too big but is this the same for the ZJ?
Posts: 850
Joined: Tue Jun 28, 2005 1:44 pm
Location: Sydney Southern Suburbs

Post by Swerve »

Back when I was in Rovers (Scouts) we had some bash cars we ran. The XA ford had F100 wheels on the rear by memory and up front had new centres put in, new centres for the dato as well

Image
Image
Image
Image
Image
2010 TB48 GU Patrol
1973 G60 MWB Soft Top Showcar
1972 G60 MWB Soft Top Project 4WD
1978 G60 Ute "HellPatrol"
www.oz4wdclassicparts.com.au
Posts: 7
Joined: Fri Jul 21, 2006 11:32 pm
Location: Mudgee NSW Australia

15' rims

Post by awb073 »

your cheapest opion would be a set of ed-el steel rims they work realy well with 10r's and the last couple of sets i brought cost $100 for the 5 rims. let me know if you cant find any.
Posts: 33
Joined: Fri Apr 28, 2006 2:03 pm
Location: Northside brissy

Post by _RYAN_ »

Easy answer.....RAV4.
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Post by macca81 »

hey swerve, was that a mudbash, banana bash, or sandblast buggy? i havnt seen any pics of it from mudbash, and she certainly hasnt been there since iv bin in rovers...



that aside, look for some agracultural tires (tractor treads) and get them put on ya current rims. will get a shiteload more traction than 98% of 4WD tires...
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Post by N*A*M »

offtopic, whats the pcd of the 6 stud ford econovan?
Posts: 300
Joined: Sun May 20, 2007 2:22 am
Location: Toowoomba QLD

Post by 90Mav »

Had some 14' retreads once with a pretty chunky a/t pattern think i paid $60 each or something.. magna wheels will also fit if u grind out the centre a bit. (bolt them on backwards with a few washers for more track width.) paid $30 each for late model magna wheels. If your in SE QLD pm me and i'll give u some.
Thrashed '90 Leaf spring Maverick ute, TD42, 2" EFS lift. 36 Swampers.
Posts: 2
Joined: Tue Jun 28, 2005 2:00 pm

Post by fouros »

16 x 6 1/2"" tarago rims will fit as well
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Post by macca81 »

ahh yes, retreads, forgot about that one. our VW beetle has a old set of desert dualers on it that have had retreads put on it. the retread is strips of 1.5"x2" rubber in the pattern of tractor tire treads. i forget what the cost was, coz they got put on about 10 years ago, and still tough as ever. gets more grip than ya could poke a stick at. scary sometimes....
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests