Where do these plugs go? and a question about reverse lights

[Itsuki Style]

Where abouts do these plugs plug into i cant see anything obvious, can anyone shed some light?



Also, neither of my reverse lights work, where abouts do these plug in? the gear box or the transfer case or what? where exactly is the plug and socket, thanks.

[just cruizin']

Gearbox my friend, get underneath and have a feel around, I forget where out of the gearbox they come.

[nicbeer]

which ones?

3 big ones go to gearbox

dont know where the two smaller ones go. i was trying to figure this out on my WT

[Itsuki Style]

so am i missing some bits of the loom or something? because i cant find any leads that those plugs join onto anywhere

[want33s]

The big round plug and the three smaller ones go to the gearbox and the two single wires go to a ballast resistor mounted on the coil.

[Dooley]

I have the exact same thing... 2 or 3 plugs and nothing obvious to connect them to.

Might look at the gearbox now...

[vk5hks]

Hi,

The three in my car are for;

4WD indicator,
Reverse indicator
5th gear indicator

According to the Zuk manual

Yellow and red are reverse or backup
Blue/green and orange/black are 4wd
the other one is your 5th gear, i think blue/orange and something?

hope this helps?

[Itsuki Style]

yeh thats helpful thanks alot everyone, that explains why my reverse lights dont work, but i think im missing abit of loom, coz i cant see anything to join those wires upto, i need to go to a wreckers and scab some stuff and have a look

[NIK]

From the passenger side of the engine bay look through the trans tunnel to the gearbox. There shoul be some wires coming out the top. I think the first one is reverse. I think the other one is something to do with pollution Ive never worrid about it. The 4wd indicator comes out of the top of the transfer just infront of the stick.
Nik

[germo]

if you just need your reverse lights to work for rego or whatever. just put a switch under you gear stick boot, that operates when you pull the stick into reverse.

I did it on my zook a few years ago, because the wires had broken of at the gearbox.

I just went to dicksmiths and got a small limit switch, screwed it to the tunnel under the boot so that when I pulled reverse, it was switching the switch. the wires just ran straight back up to one of the plugs.

its a quick fix, that works well

enjoy ashley

[PJ.zook]

Yeh really all you need is the reverse light, all the others on the gearbox are superfluous for pollution control.

[rangiesport]

sorry to hijack this thread but could you take a picture of the wiring for the coil and how its hooked up please and post or pm it to me please.

just unable to get spark on my 1.3

[want33s]

[Itsuki Style]

Yeah judging by that pic, i must be missing a bit of the loom, god damn Scanas guts. If anyone knows of anyone wrecking a zook, let me know, i need heaps of stuff from it

[skez]

which ones?

3 big ones go to gearbox

dont know where the two smaller ones go. i was trying to figure this out on my WT

any one no exactly wat they are and iff needed

[want33s]

which ones?

3 big ones go to gearbox

dont know where the two smaller ones go. i was trying to figure this out on my WT

any one no exactly wat they are and iff needed

Have you read this thread? All the answers you seek are there.

[skez]

the 3 plugs on the gbox?
i no one is the reverse light switch
they reckon one is 5th gear wire and the other is maybe a pollution thing are these needed and wat do the other 2 actually do

[nicbeer]

ballast resistor

[skez]

huh