Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Need some simply alloy welded in Melbourne

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
User avatar
ToNkA
The Haggler!
Posts: 6652
Joined: Sun Oct 20, 2002 8:48 pm

Need some simply alloy welded in Melbourne

Post by ToNkA »

Almost finished with the mods to the highmount.

I need to get some alloy tabs welded to the winch to run the two cross braces I have that go over the back of the drum like on the M9000 and M10,000 winches. I am sure those that have done this mod know what I am talking about.

Where in Melb can someone do this simple little alloy weld for me?

Cheers
MY JEEP BUILD
v840 wrote: [Not a shot at Tonka] It's like saying, hell I've got two nuts, I may as well cut one of them off for the hell of it. I ain't using it.[/NAS@T] It's ridiculous!
Top
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Contact:
Contact N*A*M

Post by N*A*M »

awill4x4 ?? :?:
Top
Posts: 305
Joined: Mon Jan 13, 2003 10:51 am
Location: Melbourne

Contact:
Contact getdirty

Post by getdirty »

Sandy at Aus4WD can do that for you..... 9729 4899 or info@aus4wd.com.au ...dont bother calling till next wednesday though, he's up at Nissan Trials.
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

N*A*M wrote:awill4x4 ?? :?:



Andrew at D&F Racing
Fcty 13/ 27 Aster Ave
Carrum Downs
9775 0558


Next door to the brothel. :D :D :D
Top
Posts: 722
Joined: Sat Nov 09, 2002 9:31 pm
Location: Berwick, Melbourne

Post by awill4x4 »

Yeah, it looks like I've been dobbed in.
I can weld them if you need me to Tonka. As Bruce posted, give me a ring at work on (03) 97750558.
Regards Andrew.
ps: We provide a (very discreet) parking service for visitors to next door :D :D :D :D
We are Tig welders, gravity doesn't worry us.
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
Top
Posts: 3825
Joined: Wed Nov 06, 2002 8:42 pm
Location: in the sky , its a bird , its a plane ! No its super MOOSE !!!

Post by moose »

We also do ally welding at work !!!!
MissForbyNoob wrote:
and one day i'll just become a worthless housewife.
Top
Posts: 722
Joined: Sat Nov 09, 2002 9:31 pm
Location: Berwick, Melbourne

Post by awill4x4 »

Nah Moose, your guys only pretend to do aluminium welding. :finger: :finger: :finger:
We are Tig welders, gravity doesn't worry us.
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
Top
User avatar
ToNkA
The Haggler!
Posts: 6652
Joined: Sun Oct 20, 2002 8:48 pm

Post by ToNkA »

Thanks guys!
MY JEEP BUILD
v840 wrote: [Not a shot at Tonka] It's like saying, hell I've got two nuts, I may as well cut one of them off for the hell of it. I ain't using it.[/NAS@T] It's ridiculous!
Top
Posts: 347
Joined: Mon Dec 01, 2003 9:13 pm
Location: Wherever I May Roam (or Melbourne)

Post by V8 Middy »

Tried AUS4wd but the recorded message doesn't sound much like abusiness.

Anyone have any more recent info on getting aluminium welded?

Thanks
73 Series Middy Cruiser 308 VN V8 OME 2in Susp lift 2in Body lift 35in Pro Comp X-Terrains
Top
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Contact:
Contact N*A*M

Post by N*A*M »

Andrew at D&F Racing does awesome work. Only bad thing is how far they are from me.
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

N*A*M wrote:Andrew at D&F Racing does awesome work..
x 2... so good hes so close :d

also very handy to
New Palace.
31 Aster Avenue.
CARRUM DOWNS 3201
;)
Last edited by bogged on Fri Oct 20, 2006 8:24 am, edited 1 time in total.
Top
Posts: 1614
Joined: Fri Feb 21, 2003 8:44 pm
Location: Melbourne

Post by landy_man »

mmm.. he is only round the corner from me at work as well...
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests