Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

slow hydraulic winch

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 49
Joined: Tue Oct 28, 2003 6:25 pm
Location: south port tas.

slow hydraulic winch

Post by flexy trol »

does anybody know if you can make an ox hydraulic winch pull faster when locked in low, or ways to make it pull quicker. :twisted:
Top
Posts: 1813
Joined: Sun Oct 20, 2002 3:31 pm

Re: slow hydraulic winch

Post by Strange Rover »

flexy trol wrote:does anybody know if you can make an ox hydraulic winch pull faster when locked in low, or ways to make it pull quicker. :twisted:


Id say that you would have to run it off its own hydraulic pump (it runs off the power steer pump - right?)

Get something to get the flow rate up a bit.

Although there could be more to it than this. The motor may have an internal bypass or something to keep it slow but I would doubt it.

Sam
Top
Posts: 1676
Joined: Tue Oct 22, 2002 9:26 am
Location: brisbane

Post by 1MadEngineer »

Had a fair bit to do with 'old blokes racin' winch truck. It flies twice the line speed of his high mount 8274, i can get you a list of all the bits if you want, eg pump and motor sizes.
Top
Posts: 543
Joined: Fri Nov 08, 2002 9:40 pm
Location: Hicksville, Cent Vic...No the other one!

Post by Juzza »

1MadEngineer wrote:Had a fair bit to do with 'old blokes racin' winch truck. It flies twice the line speed of his high mount 8274, i can get you a list of all the bits if you want, eg pump and motor sizes.


If you can get the details that would be real helpful.
What type/brand did the winch start out as?
Custom Barwork
Cages built to CCDA specs
Turbo and intercooler systems for diesel and petrol.......PM me.
Centavic Performance 4WD
Top
Posts: 49
Joined: Tue Oct 28, 2003 6:25 pm
Location: south port tas.

Post by flexy trol »

so I would need to run a more powerfull pump and a bigger tank how big ? Are we talking 10-20 liter tank with a pump the size as one used on a small hiab crane and what about the inturnall aspects of the winch does anything need changing. Your theory on this would be very helpfull.
Top
Posts: 714
Joined: Sun Aug 17, 2003 8:58 pm
Location: Cairns, (capital of Nth QLD)

Post by Kev80 »

Why wouldn't you stick with the trusted high mount instead of going to all that trouble ?
GXL Turbo Diesel 80 series- 6" King springs + Rancho in-cab kit- 35" BFG Muds Twin ARB airlockers.
Top
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Contact:
Contact turps

Post by turps »

why not be different. Some times different is good.
Also some of the hydrulic winches I have seen are more reliable then an elec one. They can also be easier to mount closure and high on the front of the car.

Turps
PTO winch
Top
Posts: 1559
Joined: Sun Nov 03, 2002 2:35 pm
Location: Captain Creek QLD

Post by Bush65 »

Speed of hydraulic winch is a function of the volume of oil delivered by the pump (displacement x revs) to the displacement of the motor. Double the size/speed of the pump will double the speed of the winch motor.

Load is a function of the pressure.

A main concern for reservoir capacity is to control the oil temp.

Biggest dissadvantage of hydraulic winch is no go unless engine is running, unless the pump (or standby pump) is electic driven.

Advantages include speed with suitable pump, smaller/lighter motor and brake (pilot operated check valves).
John
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest