Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Want to put surf coil rear on my lux

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

Sic Lux wrote:Don't 60's have offset diff unlike lux in centre correct me if i'm wrong so tailshaft angles could be a drama :?:
the uni's won't even know they are running horizontal instead of vertical angle ;) :cool:
hands and mums dont count!!!
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

beebee wrote:
bj on roids wrote:why does everyone use stock links?

how hard is it to make your own links? :?
Stock links make engineering a possibilty. Non std links makes it almost impossible.
AHHHHHHHHHHHH

*many pennies are dropping*
hands and mums dont count!!!
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

bj on roids wrote:
Sic Lux wrote:Don't 60's have offset diff unlike lux in centre correct me if i'm wrong so tailshaft angles could be a drama :?:
the uni's won't even know they are running horizontal instead of vertical angle ;) :cool:
It does not matter how many times you try and explain this to some people they just never get it.
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

RUFF wrote:
bj on roids wrote:
Sic Lux wrote:Don't 60's have offset diff unlike lux in centre correct me if i'm wrong so tailshaft angles could be a drama :?:
the uni's won't even know they are running horizontal instead of vertical angle ;) :cool:
It does not matter how many times you try and explain this to some people they just never get it.
Yep you are simply rotating the axis on which they work ...
If it is vibrating simply drive your veheilce on a 35% side slope and the vibrations will go away :D
Top
Posts: 179
Joined: Mon Feb 06, 2006 3:51 pm
Contact:
Contact Spimon_NH

Post by Spimon_NH »

Well then, if no one can see any huge problems I'm going to have, I'll start looking into it (plenty of time to check it'll work while saving up for it) :lol:
Just the steering that scares me a little, hehe.

(Should give me some 'cooling off time' too, to lose interest in yet another one of my incredible plans :oops: )
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 3 guests