Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

4x4 wreckers in VIC

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

4x4 wreckers in VIC

Post by bad_religion_au »

hi i'm a newbie to this board, from Vic, drive a 76 fj40 and a 80 hj45 troopcarrier

anyone know of any decent places to get second hand 4x4 parts in victoria, prefferably toyota parts. i know of toyhatsu and that's about it. they seem a little expensive for some things, but good to deal with. any other good 4x wreckers in vic?
Spit my last breath
Top
Posts: 2808
Joined: Tue Jul 08, 2003 4:51 pm
Location: NORTH of the black stump.......Townsville

Contact:
Contact MUSS

Post by MUSS »

hmmm what bout 4x4SALVAGE out near narriwarren? :armsup:
:armsup: The Offical Founder of ARMS UP
Jimmy James Beam the III from babinda and mt isa and other places u don't wanna know about :armsup:
www.blackriver4wd.com
Top
Posts: 145
Joined: Fri Jan 10, 2003 8:34 pm
Location: Ringwood, Melbourne

Post by Maddog »

Hall 4x4, 1 Barry St, Baywswater.

They gave me a 3L.
Always late in a 2.8
Top
Posts: 240
Joined: Sun Jul 06, 2003 10:22 pm
Location: perth west australia

Post by roscoFJ73 »

A wrecker that sell s cheap cruiser parts hmmm.I dont think there is such a thing.They are all f%$#@g crooks.Went to buy a sunvisor and the gorrilla behind the counter picks up one out of a puddle with his black greasy hands putting marks all over it and hands me this tattered piece of s%$# and says $35 ,its the only one we got.
1988 FJ 73 LX Lim Ed powered by 1HZ
1995 HZJ75 cab chassis
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

roscoFJ73 wrote:A wrecker that sell s cheap cruiser parts hmmm.I dont think there is such a thing.They are all f%$#@g crooks.Went to buy a sunvisor and the gorrilla behind the counter picks up one out of a puddle with his black greasy hands putting marks all over it and hands me this tattered piece of s%$# and says $35 ,its the only one we got.


thats because the clips always break and they are a roadworthy item so they are a good seller, 35 is over the top, unless it is an 80 or 100's then you would be paying more.

NICK
TECH SCREW GURU
Top
Posts: 3073
Joined: Sun Jul 27, 2003 5:37 pm
Location: Mornington Peninsula, Victoria

Contact:
Contact bj42turbo

Post by bj42turbo »

I go to a 4x4 wreckers in sommerville and Don Kyatt in Moorabin...Dazz


P.s Bad_relig....Toolangi??????
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

yeah i know, if you haven't read my reply to your oil pressure Q on ih8mud, it will be delayed a little, gotta rebuild the diff in my 40. what i thought was a uni turned out to be worse :)
Spit my last breath
Top
Posts: 57
Joined: Sun Nov 02, 2003 3:04 pm
Location: bind.tk

Contact:
Contact Jonathan Ferguson

Post by Jonathan Ferguson »

P.s Bad_relig....Toolangi??????
:armsup:
[b][i][u][color=Orange]LIFE AIN'T WORTH LIVING WHEN YOU DIE BEFORE YOU'RE MEANT TO![/color][/u][/i][/b]
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

what was that arms up for Jferg? is it because i broke my diff, or your so happy to see me??? :roll: :D

so if i can get it together, or you don't mind potentially pulling out a big ass hj45 instead of my fj40, when are you guys able to do stuff?
Spit my last breath
Top
Posts: 57
Joined: Sun Nov 02, 2003 3:04 pm
Location: bind.tk

Contact:
Contact Jonathan Ferguson

Post by Jonathan Ferguson »

Going to my Uncle's place Tuesday to make the inside bit of the Push Rod between the Slave Cyclinder and Clutch Fork then I will get the Clutch done, probable on Friday 14.

Have the Overlander Forumite Gathering at Brisbane Ranges National Park on Sunday 16. :finger:
[b][i][u][color=Orange]LIFE AIN'T WORTH LIVING WHEN YOU DIE BEFORE YOU'RE MEANT TO![/color][/u][/i][/b]
Top
Posts: 203
Joined: Tue Aug 26, 2003 11:46 am
Location: Somewhere In The BGGR Mobile

Post by Buggarr »

Theres 2 in Dandenong, 1 on South Gippsland Hwy & the other is on Frankston-Dandenong Rd and for my money f/ston-dandy rd 1 is better. They r called (All Four Wrecking 9791-1922) :cool:
If U Don't Like My Driving Stay Off The Footpath.

Don't Follow Me, I'm Lost Too

:lol: :cool: :twisted: :bad-words: :armsup:
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

anyone had any dealings with Southern 4x4 Dismantlers on the Hume Highway Campbellfield?

i was told to try there once for parts, and was told that they only do mechanical repairs, now i read that they offer parts.
Spit my last breath
Top
Posts: 3825
Joined: Wed Nov 06, 2002 8:42 pm
Location: in the sky , its a bird , its a plane ! No its super MOOSE !!!

Post by moose »

southerns do wrecking !!!
halls , bayswater
4x4 salvage , dandy
total 4x4 , epping
.................& lots more !!! :D
MissForbyNoob wrote:
and one day i'll just become a worthless housewife.
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

thanks all. i was told by southern they don't do wrecking, and i was told by total that they don't do wrecking. now i'd better check this out...
Spit my last breath
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest