Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Disconnecting emmisions systems.

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 3099
Joined: Wed Dec 11, 2002 10:55 am
Location: Central Queensland

Disconnecting emmisions systems.

Post by BundyRumandCoke »

Now that I have gone out and installed the emmissions system on my daughters Rocky, and got it registered, I now want to disconnect it.
Its a 3Y Toyota motor. Foolishly, I didnt note down how it was disconnected before "fixing" it.
Can anyone tell me what to disconnect, or more importantly, what to leave connected, as the bare minimum.

Cheers
Bundy
Mud makes excellent toothpaste.
Posts: 1256
Joined: Mon Jun 19, 2006 7:05 pm
Location: newzealand

Post by tweak'e »

best way is to block the EGR inlet. ie plate across the EGR valve.

however being a petrol motor there can be some economy benifit in useing EGR, if its properly setup. it will depend on age of vechile (carb/EFI etc).
Posts: 194
Joined: Mon Mar 29, 2004 7:03 pm
Location: NOW IN TOWNSVILE

Post by skippy's GQ »

tweak'e wrote:however being a petrol motor there can be some economy benifit in useing EGR, if its properly setup. it will depend on age of vechile (carb/EFI etc).
I would have to agree, disconecting it wont make any noticeable difference to power, and wont take power away with it conected....
88 GQ SWB 5''SUS LIFT 60MM BODY LIFT, FRONT LOKKA, NOW WITH 304, ...... :D

www.roverpark.com
Posts: 98
Joined: Thu Oct 21, 2004 9:26 am
Location: Newcastle

Post by BundyBrumby »

I recently fitted a new aftermarket 4y to my lux, replacing the 3y. The new motor didn't have near the amount of "drill outs" for the pollution system as the old one, ie no EGR, no christmas trees etc.

The only things which are set up to work are the vacuum advance and charcoal cannister. I now only have 2 pipes to the carby, not 5, and every thing else is blocked up, but still looks like its connected. The metal pipes which run over the top of the manifold are not on the vehicle. it looks much neater.

I have had no problems what so ever with the way it runs
YN65 X-Tra cab, 33's, 3" body lift otherwise stock. (the brumby got stolen)
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

just out of curiosity, why do you want to block it off??
Posts: 2158
Joined: Sat Jan 20, 2007 8:16 am
Location: New Zealand

Post by KiwiBacon »

tweak'e wrote:best way is to block the EGR inlet. ie plate across the EGR valve.

however being a petrol motor there can be some economy benifit in useing EGR, if its properly setup. it will depend on age of vechile (carb/EFI etc).
I disconnected the EGR on my car (not my 4wd), it made absolutely no difference to power or economy.
So I hooked it back up again.
Posts: 1256
Joined: Mon Jun 19, 2006 7:05 pm
Location: newzealand

Post by tweak'e »

KiwiBacon wrote:
tweak'e wrote:best way is to block the EGR inlet. ie plate across the EGR valve.

however being a petrol motor there can be some economy benifit in useing EGR, if its properly setup. it will depend on age of vechile (carb/EFI etc).
I disconnected the EGR on my car (not my 4wd), it made absolutely no difference to power or economy.
So I hooked it back up again.
ona petrol, if properly done it shouldn't make any noticable difference. EGR is off at full throttle so there should be no power change.

however older carby vechiles where often had really complicated systems which went faulty often causeing all sorts of problems. hence they are better rip out and thrown away.

with modern EFI motors it should be a different story. sorry havn't had much to do with EGR on EFI vechiles.
Posts: 2158
Joined: Sat Jan 20, 2007 8:16 am
Location: New Zealand

Post by KiwiBacon »

tweak'e wrote:ona petrol, if properly done it shouldn't make any noticable difference. EGR is off at full throttle so there should be no power change.

however older carby vechiles where often had really complicated systems which went faulty often causeing all sorts of problems. hence they are better rip out and thrown away.

with modern EFI motors it should be a different story. sorry havn't had much to do with EGR on EFI vechiles.
I was mostly curious to see what the results would be on part load cruising (i.e. flat road, 100km/h).
EGR has the potential to reduce throttling losses at cruise, but it also makes the efficiency drop.
I guess on my car those effects cancelled each other out damn near perfectly.
Posts: 3099
Joined: Wed Dec 11, 2002 10:55 am
Location: Central Queensland

Post by BundyRumandCoke »

Ok, this is on a 22 year old, carbed, 3Y Toyota motor. 225000km on the clock. Engine history unknown. The emmisions were disconnected when we bought it.

Having played with diesels for the last 12 years or so, my knowledge for petrols has gone out the window yonks ago.

All I basically remember from my younger days was, the first thing you pulled from any vehicle if you wanted some sort of performance and economy improvement was the emmissions system. It also seems that the economy of this thing isnt the best at the moment, as I can virtually see the needle dropping, but this may be any number of things, as it hasnt had a tune or anything changed since purchase.

I think, that at the moment, I now have just the charcoal canister and the dizzy connected to vaccum, and everything else blocked off.
Mud makes excellent toothpaste.
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

so your first step before a tune is ripping out the emission controls?

ive never had much to do with petrols either, but that sounds silly to me.
Posts: 1256
Joined: Mon Jun 19, 2006 7:05 pm
Location: newzealand

Post by tweak'e »

BundyRumandCoke wrote:Ok, this is on a 22 year old, carbed, 3Y Toyota motor. 225000km on the clock. Engine history unknown. The emissions were disconnected when we bought it.
original NZ and most likely AU ones as well, never had emission control systems on them anyway. sounds like the motor is an imported one.
Shadow wrote:so your first step before a tune is ripping out the emission controls?

ive never had much to do with petrols either, but that sounds silly to me.
yeah thats often the way with older motors. in fact with a lot of the early ones you could get them running better and with less emissions without the emission gear. just shows how crappy the early emissions gear was.

now days the systems are a lot more accurate. which mean you can get gains due to reducing throttle looses.
Posts: 3099
Joined: Wed Dec 11, 2002 10:55 am
Location: Central Queensland

Post by BundyRumandCoke »

Nope, original engine for vehicle. Numbers match on block and plate.
Mud makes excellent toothpaste.
Posts: 1698
Joined: Sun Nov 28, 2004 7:26 pm
Location: Canberra Australia

Re: Disconnecting emmisions systems.

Post by Ezookiel »

Does anyone know what the penalty is - or where to find the penalty - for disconnecting or blocking an EGR?
Some diesel vehicles are notorious for carbon build up due to our crap diesel, and the EGR system, and people are taking to blocking them off.

I'm not about to do so as I have a 5 year warranty on my vehicle, and am not about to go playing silly buggers with that, but would be interested to know what the actual penalty is if you get a roadside inspection AND they put a sniffer on your exhaust AND that then leads them to find your EGR is blocked off.

Thanks in advance.
[url=http://www.4x4him.org]Bringing the Christian Rock Crawling Community a little closer[/url]
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Re: Disconnecting emmisions systems.

Post by Shadow »

Ezookiel wrote:Does anyone know what the penalty is - or where to find the penalty - for disconnecting or blocking an EGR?
Some diesel vehicles are notorious for carbon build up due to our crap diesel, and the EGR system, and people are taking to blocking them off.

I'm not about to do so as I have a 5 year warranty on my vehicle, and am not about to go playing silly buggers with that, but would be interested to know what the actual penalty is if you get a roadside inspection AND they put a sniffer on your exhaust AND that then leads them to find your EGR is blocked off.

Thanks in advance.

potentially there are big fines. But this has to all go through court etc. Most likely you will just get a defect notice.
03 HDJ100R GXL / 94 FJ45-80
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Re: Disconnecting emmisions systems.

Post by V8Patrol »

Ezookiel wrote:Does anyone know what the penalty is - or where to find the penalty - for disconnecting or blocking an EGR ?
One of the guys in the local car club got done about a year ago.......

FINE was $7000, for no egr, no cats, and atmosphere released gases from the BOV's.......
( I know missing cats attracts a fine of $2000....... :bad-words: )

He had ...... Court appearance, and a whole heap of uglyness to get the car back on the road, costs totaled around the 10K mark in the end
:shock:
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests