Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

IFS suspension setups

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 29
Joined: Tue Jul 17, 2007 6:01 pm
Location: Glasshouse Mnts, Sunshine Coast

IFS suspension setups

Post by dfj20 »

Hey,

New to the forum, i have had a few hilux's/4runners in the past but the have all been live axle front. i will post pics up in the my ride section later.

I am picking up a 93 2.8d xtra cab this week and it is IFS, and i havent really got much of an idea on how to lift it and keep a good ride and good flex.

First things i will be doing are:
2" body lift, 33" tyres and possibly arb front air locker.

Now i have read about BJ spacers and a few other things but would like some tips on what direction to go. And how high can i go with winding up the torsion bars?

thanks
shane
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

http://carl.outerlimits4x4.com/viewtopi ... +inch+lift
Have a look at these being in qld tho not legal
Mate has 31"pedes on his ifs lux and they just hit so i'd asume 33's will do some work on your guards
plenty of parts on the bench
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Post by ausyota »

On my old Lux I fitted 35"s with only a 40mm bodylift :D
I had to cut and shut the firewall & guards though :twisted: .
I did run 33"s before going bigger and they fitted with a bit of hammer work to the firewall.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Posts: 80
Joined: Tue May 02, 2006 11:55 pm
Location: The Go

Post by playdoh »

You'd wanna keep the torsion bar winding to a minimum (1" at the most), because it actually increases the spring load and reduces the available flex.

Twisty has the BJ spacers on his 4Runner, would be the best one to ask I think. You can get 4" spacer kits which don't change the ride/ travel, just move the diff/ lower control arms down, to give you the height you need for bigger tyres (like the SR one Sic Lux posted).

I had 33's on mine with just a 2" lift (suspension, not body), but they rubbed pretty bad on the mudflap area of the front guards.
Posts: 217
Joined: Thu Jan 13, 2005 12:01 pm
Location: East BrisVegas

Post by V6XtraHilux »

Like Sic Lux said, all of the above options are illegal in QLD.

If that aint a problem for ya, then go ahead.

Not many options for an IFS in QLD im afraid. Have asked around myself about SAS on Luxes in QLD, but havent gotten any true answers.
03 V6 Xtra Cab Hilux F&R Lockers 4' BL/susp 33' BFG MTs sliders ARB bullbar IPFs-workn 4 SAS$$
Posts: 29
Joined: Tue Jul 17, 2007 6:01 pm
Location: Glasshouse Mnts, Sunshine Coast

Post by dfj20 »

thanks guys,

I will go with body blocks and winding torsions up a little and the bj spacer kit with 2" springs in the back and see how it looks. And i have lined up a set of 33's i cant trial fit on it, from what i have found out i should run either live front ofset, cruiser or patrol.

Legality doesnt really worry me, my 4runner that i had has 2" blocks,
2" springs, extended shackles all round and 33's never had any dramas
some people on the coast have probably seen it, its a yellow 86 4runner with black canopy.[/img]
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest