Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

v6 rocky (up & running)

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Post Reply
Posts: 389
Joined: Sun Feb 05, 2006 10:45 am
Location: nsw

v6 rocky (up & running)

Post by dai-hard »

After my wife blew up the diesel i looked around and it was goin to cost about 2/3 grand to repair. So thought Fark it went to dellow and bought the kit.
Managed to find a vp commodore 130000ks full service history $600 (it was in really good nick ) pulled the engine and all the harnesses i needed & relays/ fuseable links etc.
I made all the engine mounts at work and cut up the commodore exhaust and made my own system on the rocky (sounds tops :lol: ).
Had to use a vl fuel pump and made a surge tank with a low pressure pump feeding from the main tank.
All ive got to do is get a power steering made up(tomorrow) and make a spacer/bush for my clutch cable.
So should be burnin around soon
Ive got heaps of pics but dont have an image host yet will get it sorted soon(if your really keen can email them)

Will let yous know how it goes


CHEERS CRAIG
Posts: 243
Joined: Mon Sep 26, 2005 10:19 pm
Location: Nhill vic

Post by Rangie Thing »

So the engine mounts don't come with the kit.

how much did the kit cost and what comes with it ?
Posts: 389
Joined: Sun Feb 05, 2006 10:45 am
Location: nsw

Post by dai-hard »

The kit cost $1500 you get
adapter -bolts onto box
bellhousing/clutch fork and bearing
spigot bearing. everything to bolt the motor to the gearbox.
You get engine mounts and a tube bracket setup the weld to the chassis rails.But you cant use the lefthand one if you want to keep the aircond.
I used there mount and made a bracket to bolt to the original daihatsu chassis mount on the right hand side.
And on the left i used the holden mount (which is part of the aircond bracket) and made my own bracket to weld to the chassis.
You also get the clutch plate(10" v8 holden with daihatsu centre)
I had to buy a flywheel $350 and a pressure plate (std v6 commodore) $160.
So if you dont want aircond you can do it with out cutting
And ive got a 80AMP alt ;)
Posts: 3132
Joined: Wed Sep 28, 2005 3:22 pm
Location: Newy

Post by HotFourOk »

dai-hard wrote: And ive got a 80AMP alt ;)
So do I :armsup:

Post up some pics when you get it up and running mate. :D

You say it was going to be around 2/3 grand to repair... although only the stuff you listed has been over $2500... It will be dearer in the end won't it then, let alone lots of fiddling around by the sounds of it?
[quote="RockyF70 - Coming out of the closet"]i'd be rushing out and buying an IFS rocky[/quote]
Posts: 389
Joined: Sun Feb 05, 2006 10:45 am
Location: nsw

Post by dai-hard »

Yer ive spend $2500 and has taken about a month of sundays and a little bit off fiddlin after work. Its been pretty easy i was expecting a lot worse.
The diesels are good but time for a change and a bit more hp. :lol:
And its just a weekend toy and i dont drive it everyday.
Posts: 6693
Joined: Mon Feb 09, 2004 10:13 pm
Location: Newcastle

Post by high n mighty »

HotFourOk wrote:
dai-hard wrote: And ive got a 80AMP alt ;)
So do I :armsup:

Post up some pics when you get it up and running mate. :D

You say it was going to be around 2/3 grand to repair... although only the stuff you listed has been over $2500... It will be dearer in the end won't it then, let alone lots of fiddling around by the sounds of it?
Your just jealous because you still have a slow diseasel :finger:
[quote="fool_injected"]
I pity my brother when she is a teenager[/quote]
Posts: 838
Joined: Sat Nov 11, 2006 10:01 am
Location: SPRINGMOUNTAIN BRISBANE

Post by pigletracing »

you will have a lot of fun soon,i looked at apower upgrade
for a diesle scat for comp work,either turbo,supercharger or both
but it was far cheaper to v6 convert, i stayed with the commy
auto,& put on a hilux tranny,4.88 diff ratios,37" tyres,
I now get around 115km/ph in low 4x4 & havent opened her up all
the way in 2wd yet, but 187km/ph by the gps felt cool
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

wheres the pics? :armsup:
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Posts: 389
Joined: Sun Feb 05, 2006 10:45 am
Location: nsw

Post by dai-hard »

Image
Posts: 389
Joined: Sun Feb 05, 2006 10:45 am
Location: nsw

Post by dai-hard »

Posts: 3132
Joined: Wed Sep 28, 2005 3:22 pm
Location: Newy

Post by HotFourOk »

Image

Look at all them electrics waiting to stuff up in the water and mud :D

Looks good mate, keep em coming.
[quote="RockyF70 - Coming out of the closet"]i'd be rushing out and buying an IFS rocky[/quote]
Posts: 389
Joined: Sun Feb 05, 2006 10:45 am
Location: nsw

Post by dai-hard »

Thanks. were am i goin wrong.
All the wiring has been tidied up now.
And dont plan on any deep crossings. put do plan on gettin down the farm quicker then usual :lol:
But i have already got a spare Computer/coilpack/fuel pump that i might keep in the back(just in case) :roll:
Posts: 389
Joined: Sun Feb 05, 2006 10:45 am
Location: nsw

Post by dai-hard »

Image[/img]
Posts: 3132
Joined: Wed Sep 28, 2005 3:22 pm
Location: Newy

Post by HotFourOk »

Just a n00b :D

Sorry about the scaling, not much can be done.

Image
Image
[quote="RockyF70 - Coming out of the closet"]i'd be rushing out and buying an IFS rocky[/quote]
Posts: 389
Joined: Sun Feb 05, 2006 10:45 am
Location: nsw

Post by dai-hard »

i must be a full blow NOOB because i dont even no what it means :?
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests