Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

do the driveshaft and jackshaft need to be lined up

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 79
Joined: Tue Jul 18, 2006 7:27 pm
Location: NSW

do the driveshaft and jackshaft need to be lined up

Post by JacZook »

do the driveshaft and jackshaft need to be lined line up in any special way?

I am getting bad vibrations at low speed but smooths out at top end.

unis seem fine not ceased at least. plenty of movement.

I am thinking that the driveshaft and jack shaft need to lined up in sync. even thou I made sure that the driveshaft is in phase but the jackshaft I just put it back in with no special detail.

Am I missing something?

cheers
Top
Posts: 1889
Joined: Mon Sep 20, 2004 10:23 pm
Location: Brisbane

Post by just cruizin' »

Given the transfer has neutral where the jack shaft can spin and the tail shaft not, I don't think it matters.
Top
Posts: 383
Joined: Fri Jul 15, 2005 7:35 pm
Location: Melbourne Victoria

Post by 84ZOOKSTA »

is the vibration only under exceleration at about 20-40km???

Simon...
Hookers are like bowling balls, You pick them up, put your fingers in them, then throw them in the gutter and they come back for more.
Top
Posts: 79
Joined: Tue Jul 18, 2006 7:27 pm
Location: NSW

Post by JacZook »

yea between 20 40 she vibrates then levels out. I really have no idea as what it could be
Top
Posts: 317
Joined: Thu Jul 19, 2007 11:03 pm
Location: Brisbane

Post by Danzo »

http://www.outerlimits4x4.com/phpBB2/vi ... p?t=115540
I hate going to weddings because all the grandma's used to poke me in the ribs saying you're next, you're next. They've stopped doing it since I started doing it to them at funerals.
Top
Posts: 31
Joined: Fri Jun 22, 2007 1:21 pm
Location: Barossa

Unis

Post by vk5hks »

Mine was doing the same last week... Check the Uni's on the jackshaft my front one was cactus. I had massive slop and wobble in it.....

Took at out after some hammering and well one of the uni points had all the bearings grinded down to rust.......

$25 and hey presto she is all good again :)
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 5 guests