HEY Rhett ya reckon you could take a couple of pics of the tbi unit and a measurement of the throat size, where it meets your intake manifold.
Thanks Dan
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
turboed zook breaking down
Moderators: toaddog, TWISTY, V8Patrol, Moderators
i dont know if anyone mentioned this (cant be bothered reading) but close the spark plug gaps down, my r31 skyline used to run 1.1mm gap and break down under boost at about 3k rpm. gap them down to .8mm and the idle will be a little rough but it wont break down.
give it a try its free!!! and easy.
but as the other guys said drop the boost and get it tuned. and run it on 98 ron.
a bleed valve wont lower the boost it will increase it.. probably not a good idea at this point in time
cam
give it a try its free!!! and easy.
but as the other guys said drop the boost and get it tuned. and run it on 98 ron.
a bleed valve wont lower the boost it will increase it.. probably not a good idea at this point in time
cam
[quote="75 cruser"]we want more donkey[/quote]
Who is online
Users browsing this forum: No registered users and 5 guests