Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Hey,
can anyone tell me the hole dimensions for a 75 series single cab tray? also if a tray from a single cab LN106 hilux has any chance of fitting on a 75 series without some serious mods? i am tryin to sell my old tray. did a search but couldnt find anythin Thanks
It really depends how wide you want it to be on any particular vehicle. My tray only sticks out each side of the cab and inch or two but others have half a foot.
Same deal with overhang at the back.
Generally its the mounting that may need to be adjusted a bit to get it to fit another vehicle.
My guess is that the 75 and Hiluxs arent that different in width so it is just matter of doing the measurements of width and length to make sure.
yeah for me modifying it would not be a problem as i am a machinist/welder type thingy but i would not be doing it, the buyer would be. widths etc arent really a prob, its more the bolt holes and distance from back of cab, chassis width etc. i dont know anyone with a 75 series to measure off or look at,
thanks
Thanks
